Onset HOBO UX100-003 Humidity and Temperature Data Logger

SKU
UX100-003
In Stock
$100.00
  • Integrated Sensors for Temperature and Humidity Measurements in an Indoor Environment
  • -20°C to 70°C and 15% to 95% RH Measurement Ranges with a ±0.21°C and 3.5% RH Accuracy
  • Stores up to 84,650 Measured Temperature Readings with Date/Time Stamp
  • LCD Display Shows Current Readings, Alarm, Battery and Operating Status
  • User-Replaceable CR-2032 Lithium Coin Cell Battery with 1 Year Life (1 Minute Sampling Rate)

Requires Type A to Mini B Standard USB Cable (CABLE-USB), HOBOware (Free Download Version) or HOBOware Pro (Paid Download Version) Software.

Add to Quote

Overview of the HOBO UX100-003 Humidity & Temperature Data Logger

The Onset HOBO UX100-003 is a Temperature and Humidity data logger that records temperature and relative humidity within an accuracy of +/-3.5% in indoor environments using integrated sensors. This device is a perfect choice for monitoring occupant comfort in office buildings, tracking food storage conditions in warehouses, temperature trends in server rooms, and measuring humidity levels in museums. The economically priced UX100-003 can monitor and record temperatures from -20°C to +70°C (-4°F to +158°F) and relative humidity from 15% to 95%rH non-condensing. The logger can store over 42k temperature and humidity readings before being downloaded and is powered by a user-replaceable coin cell battery with a typical life of 1 year. The logger is configured, and data is viewed using the free HOBOware software, available for both PC and Mac.

Need something with higher accuracy? Check out the UX100-011A here.

Onset HOBO® UX100-003 Temperature and Humidity Data Logger Specifications

Data Channels 1 Temperature Channel
1 Humidity Channel
Humidity Measurement Range: 15% to 95%
Accuracy*: ±3.5% (25% to 85% RH) @ 15°C to 45°C; ±5% (25% to 95% RH) @ 5°C to 55°C
Resolution: 0.07% @ 25°C and 30% RH
Response Time: 43 Seconds to 90% in Air Moving 1 m/s (2.2 mph)
Drift: < 1% per year
* Includes Hysteresis
Temperature Measurement Range: -20°C to 70°C (-4°F to 158°F)
Accuracy: ±0.21°C (±0.38°F) @ 0°C to 50°C
Resolution: 0.024°C @ 25°C (0.04°F @ 77°F)
Response Time: 4 Minutes in Air Moving 1 m/s (2.2 mph)
Drift: < 0.1°C (0.18°F) per year
Data Storage Capacity 84,650 Temperature Readings
Sampling Rate 1 Second to 18 Hours (User-Specified)
Display Type: LCD
Note: Display is Visible from 0°C to 50°C (32°F to 158°F)
Display May React Slowly or Go Blank in Temperatures Outside this Range.
Power Source (1) CR2032 Lithium Coin Cell Battery
Battery Life 1 Years @ 1 Minute Sampling Rate
(Dependant Upon Environment and Operating Range)
Alarms Visual High and Low Alarm Thresholds Displayed on LCD and Set via Software
Time Accuracy ±1 Minute per Month @ 25°C (32°F to 122°F)
Communications USB Connection to Setup Data Logger and Download Data
Logging Modes Normal, Burst or Statistics
Data Storage Modes Stop When Full or Wrap/Overwrite When Full (FIFO)
Start Modes Immediately, Push Button, Date & Time or Next Interval
Restart Mode Push Button
Stop Modes When Data Storage Full, Push Button or Date & Time
Software Compatibility HOBOware and HOBOware PRO Version 3.5+
OS Compatibility Windows: Windows 10, 8.1, 8 and 7
Mac: OS X 10.9.x, 10.10.x and 10.11.x
Operating Range Temperature: -20°C to 70°C (-4°F to 158°F)
Humidity: 0 to 95% RH (non-condensing)
Launch/Readout: 0°C to 50°C (32°F to 122°F) per USB Specification
Standards Compliance CE, IP50
Weight 30 grams (1.06 oz.)
Dimensions 3.66 cm x 5.94 cm x 1.52 cm (1.44" x 2.34" x 0.6")
Write Your Own Review
You're reviewing:Onset HOBO UX100-003 Humidity and Temperature Data Logger
Your Rating
Customer Questions
I have this device and the hobo software down loaded. How do I change the recording interval? the instructions don't match the device or software.

Please make sure you downloaded and installed the correct software  which is HOBOware.  This software can be found on the product page for this product under the "manuals and resources" tab.

Also included on that tab is the instructions for the logger and the software.  It will walk you through how to configure the sample rate when you set up the logger for use.  If you continue to need assistance please contact our tech support team at 877-275-9606.

Is proprietary software required to read the values? Put another way, can I connect it to any brand of computer, and download a CSV file?

The logger requires that you use proprietary software to configure and view the recorded data.  The software is available as a free download form our website.  Once you open the data in the software you can view it there or export it as a CSV or PDF file.

Did you find what you were looking for?
Copyright © 2022 MicroDAQ, LLC. All Rights Reserved.