MD301 AC Current Probe
AEMC Current Probe Measures up to 500 Amps
SKU
1201.07
$232.75
- Measures up to 500 Amps
- Unique Design for Probing in Crowded Wiring in Industrial and Automotive Environments
- Handles Contain Electronics and Batteries
- Provides Voltage Output Proportional to the Total Current
- Maximum Conductor Size of (2) 500kcmil
Designed for Recorders, Loggers and other Instruments with mVDC Inputs
Special order - typical lead time is 2-4 weeks, however there may be shipping delays beyond our control
Overview of the AEMC MD301 AC Current Probe
The MD301 AC current probe is built for ruggedness, versatility, and ease of use. It’s a general purpose 500A current probe, but with mV DC output for recorders, data loggers, or any instrument with mV DC inputs. The sensor terminates with double insulated 5’ leads with safety banana plugs.
AEMC 1201.07, MD301 AC Current Probe Specifications
Nominal Range | 500 Amp |
Measurement Range | 2 to 500 AAC |
Transformation Ratio | Voltage Output |
Output Signal | 1mVDC/AAC |
Accuracy (500A Range) | 25A: 5% of Reading 100A: 2% of Reading 250A: 1% of Reading 500A: 1% of Reading |
Phase Shift | N/A |
Overload | 700A for 10 min |
Frequency Range | 48 to 1000Hz (Error: Add 2% to the Ref.) |
Load Impedance | ≥100kΩ |
Working/Common Mode Voltage | 600 Vrms |
Output Termination | 5ft Lead |
Operating Range | Temperature: 5°F to 122°F (-15°C to 50°C) |
Storage Range | Temperature: -40°F to 185°F (-40°C to 85°C) |
Conductor Size | 1.18" (30mm) Maximum |
Bus Bar Size | 2.48 x 0.2"(63mm x 5mm) Maximum |
Jaw Opening | 1.3" (33mm) |
Polycarbonate Material | Handle: 10% Fiberglass Charged Polycarbonate UL94 VO |
Double Insulation | Yes |
Standards Compliance | CE, EN 61010-2-32 |
Dimensions | 66mm x 195mm x 34mm (2.6" x 7.68" x 1.34") |
Weight | 14.8 oz (420 grams) |
Customer Questions