Measurement Computing Corp

Items 1-8 of 85

Page
per page
Set Descending Direction
  1. 16 Channel 24-Bit Multifunction USB DAQ Device
    USB-2408
    • (16) Analog Inputs, 8 Digital I/O and 2 Counter Inputs
    • 1 kS/s Sampling Rate on All Analog Input Channels
    • Software Selectable Measurement Ranges from ±0.78 Volts to ±10 Volts
    • Software Compatible with Windows, Linux and Mac Operating Systems
    • Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required

    Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

  2. Bluetooth and USB Data Acquisition Device w/ 8 Analog Inputs
    BTH-1208LS
    • (8) Analog Inputs, (2) Analog Outputs, (8) Digital Inputs/Outputs and (1) Event Counter
    • Bluetooth (Paired with Host Device) and USB Operation Modes for Transmission of Data
    • Aggregated Sampling Rate up to 1 kS/s (Bluetooth - Continuous Scan) or 50 kS/s (USB or Bluetooth - Burst Mode) across all channels
    • Software Selectable Analog Input Ranges of ±10 Volts (Single-Ended) or up to ±20 Volts (Differential)
    • USB and Battery Powering Options with Battery Recharging Capability

    Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

  3. USB-201 12-Bit Data Acquisition Device w/ 8 Analog Inputs
    USB-201
    • Screw Terminal for (8) Single-Ended Analog Inputs, (8) Digital I/Os and (1) 32-Bit Counter Input
    • Aggregate Sampling Rate up to 100 kS/s (1 Channel = 100 kS/s; 2 Channels = 50 kS/s Each)
    • -10V to 10V Input Voltage Range with 1 MΩ Input Impedance
    • Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required
    • LED Indicator for Status (On or Off) and Activity (Blinking)

    Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

  4. High Current Digital Input/Output (I/O) Module
    USB-1024HLS
    • Designed for Monitoring and Controlling the State of Switches, Fans and Valves
    • 24 Logic-Level Digital Input/Outputs with High Current Output (15 mA Source, 64 mA Sink)
    • Independent Digital Port Configuration for Input or Output
    • Based on Industry Standard 82C55 Programmable Peripheral Interface Chip
    • Powered by +5 Volt USB Power Supply (Self Powered)

    Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

  5. USB-1208FS-PLUS USB-Based 8 Channel Data Acquisition Device
    USB-1208FS-Plus
    • High Speed USB Device with (8) 12-Bit Analog Inputs, (2) Analog Outputs, (16) Digital I/Os and (1) External Event Counter
    • Analog Inputs are Software Configurable for (8) Single-Ended or (4) Differential Inputs
    • Independent Digital Port Configuration for Input or Output
    • 50 KS/s Aggregated Sampling Rate Over All Channels
    • Powered by +5 Volt USB Power Supply (Self Powered)

    Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

  6. 16 Channel 250 k/s High-Speed Multifunction DAQ Device
    USB-1608G
    • (16) Analog Inputs, (8) Independent Digital I/Os, (2) Counter Inputs and (1) Timer
    • 1 S/s to 1MS/s Sampling Rate, Software Programmable
    • Single and Differential Analog Inputs w/ Measurement Range up to ±10 Volts
    • Measurement Rate up to 250 k/S Aggregated Over All Analog Input Channels
    • Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required

    Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

  7. USB-204 12-Bit Data Acquisition Device w/ 8 Analog Inputs
    USB-204
    • Screw Terminal for (8) Single-Ended Analog Inputs, (8) Digital I/Os and (1) 32-Bit Counter Input
    • Aggregate Sampling Rate up to 500 kS/s (1 Channel = 500 kS/s; 2 Channels = 250 kS/s Each)
    • -10V to 10V Input Voltage Range with 1 MΩ Input Impedance
    • LED Indicator for Status (On or Off) and Activity (Blinking)
    • Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required

    Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

Items 1-8 of 85

Page
per page
Set Descending Direction
Copyright © 2021 MicroDAQ.com, Ltd. All Rights Reserved.