Energy and Power Data Loggers

Energy & Power Data Loggers and are used to measure and record power consumption and quality. They can be used in both residential and commercial applications. These devices monitor and record different electrical parameters that can include volts, amps, watts, volt-amps (VA), volt-amps reactive (VAR), kilowatts (kW), kilowatt hours (kWH), power factor and harmonics.

Simple plug level load data loggers can tell you how much power is being consumed by a variety of household electronics and large scale multi-circuit power submeters let you monitor multiple independent loads without having to purchase individual energy meters. These devices can be integrated into building management systems and used to record and track tenant power consumption or monitor power consumption across multiple devices.

7 Items

Set Descending Direction
per page
  1. PEL103 Power and Energy Data Logger w/ LCD Display
    2137.52
    • Power (VA, W, var) & Energy (VAh, Wh, varh) Measurements on 50/60Hz, 400Hz and DC Systems
    • Measurement Range of 100mA to 10,000 Amps with MiniFlex Current Sensors (Included)
    • 4 Line LCD Display Shows 3 Phases Simultaneously on a Bright Blue Monochrome Backlit
    • Store Measured Current and Voltage Readings onto SD(HC) Cards up to 32 GB
    • RMS and DC Measurements of each Phase at 128 Samples per Cycle
    • Bluetooth, USB and Ethernet LAN Communications Options for Setup and Configuration
    • New! Android App to Connect, Configure, Setup, View Data Using Bluetooth or WiFi Communications

    Includes Tool Bag, (3) MiniFlex Current Sensors, USB Cable, (4) Black Test Leads w/ Alligator Clips, AC Power Adapter, (12) Color-Coded ID Markers, Multifix Mounting System, Safety Card, 2 GB SD Card and USB-SD Card Reader, USB Memory Stick with User Manual and DataView PC Software

  2. PEL102 Power and Energy Data Logger
    2137.51
    • Power (VA, W, var) & Energy (VAh, Wh, varh) Measurements on 50/60Hz, 400Hz and DC Systems
    • Measurement Range of 100mA to 10,000 Amps with MiniFlex Current Sensors (Included)
    • Store Measured Current and Voltage Readings onto SD(HC) Cards up to 32 GB
    • RMS and DC Measurements of each Phase at 128 Samples per Cycle
    • Bluetooth, USB and Ethernet LAN Communications Options for Setup and Configuration
    • New! Android App to Connect, Configure, Setup, View Data Using Bluetooth or WiFi Communications

    Includes Tool Bag, (3) MiniFlex Current Sensors, USB Cable, (4) Black Test Leads w/ Alligator Clips, AC Power Adapter, (12) Color-Coded ID Markers, Multifix Mounting System, Safety Card, 2 GB SD Card and USB-SD Card Reader, USB Memory Stick with User Manual and DataView PC Software

  3. PowerPad III Model 8333
    2136.10
    • Measures TRMS Voltages up to 1000 Vrms AC or 1200 VDC for 1, 2 and 3-phase Systems
    • Measures TRMS Current up to 10 kArms (Sensor Dependent)
    • (4) Voltage Inputs and (3) Current Inputs
    • Stores Trend Data, 4,000 Alarms, 51 Captured Transients and up to 12 Screen Snap Shots
    • VA, var, W, kVAh, VARh, kWh and Totals (per Phase) Measurements and Recordings

    Includes (4) Black 10ft Voltage Leads, (4) Black Alligator Clips, (12) Color-Coded Input ID Markers, NiMH Battery, 110/240 V Power Adapter with US Power Cord, Carrying Bag, Soft Carrying Pouch and USB Stick with Software and User Manual

  4. PowerPad III Model 8336
    2136.30
    • Measures TRMS Voltages up to 1000 Vrms AC or 1200 VDC for 1, 2 and 3-phase Systems
    • Measures TRMS Current up to 10 kArms (Sensor Dependent)
    • (4) Voltage Inputs and (3) Current Inputs
    • Stores Trend Data, 4,000 Alarms, 51 Captured Transients and up to 12 Screen Snap Shots
    • VA, var, W, kVAh, VARh, kWh and Totals (per Phase) Measurements and Recordings

    Includes (4) Black 10ft Voltage Leads, (4) Black Alligator Clips, (12) Color-Coded Input ID Markers, NiMH Battery, 110/240 V Power Adapter with US Power Cord, Carrying Bag, Soft Carrying Pouch and USB Stick with Software and User Manual

  5. PowerPad IV Model 8345
    2136.35
    • Measurement of Voltage, Current, Frequency and Power Quality on 1, 2 or 3-Phase Networks
    • Voltage Measurements Measures TRMS Voltages up to 1000 Vrms AC or 1200 VDC
    • Measures TRMS Current up to 10 kArms (Sensor Dependent)
    • (5) Voltage Inputs and (4) Isolated Current Inputs
    • Stores Trend Data, 4,000 Alarms, 51 Captured Transients and up to 12 Screen Snap Shots
    • Analysis of Electrical Installations for Energy Efficiency According to IEEE1459 Standard

    Includes AEMC 8345 Meter, Tool Bag, USB Cable, (5) 10 ft Black Voltage Leads with Alligator Clips, (12) Color-Coded input ID Markers, Power Adapter with US Power Cord, (2) 6 ft Stackable Leads, (2) 10 ft Black Voltage Leads with Alligator Clips for Power Adapter, SD Card, Power Plug Adaptor, 5.8Ah Li-ion Battery Pack and DataView Software

  6. PEL52 Power and Energy Logger
    2137.71
    • Simple to Use, Portable, Single and Split Phase Power and Energy Monitoring 
    • TRMS Voltage and Current Measurement up to 600 Volts
    • Automatic Detection of Current Sensors for Easy Use
    • Measured Readings Stored onto SD Card for easy Analysis on PC
    • WiFi Communications and Integrated Web Server for Remote Connectivity, Viewing and Diagnostic Troubleshooting
    • Powered by the Measuring Phase with Battery Backup
    • DataView Software for Configuration, Real-Tme Data Display, Data Analysis and Reporting

    Includes Soft Carrying Bag, (3) Black Test Leads with Aligator Clips, 110V US Power Cord, Adapter for Power Cord, 8 GB SD Card, USB SD Card Reader, (2) AAA Rechargeable Batteries and DataView Software

  7. PEL52 Power and Energy Logger with Sensors
    2137.69
    • Simple to Use, Portable, Single and Split Phase Power and Energy Monitoring 
    • TRMS Voltage and Current Measurement up to 600 Volts
    • Automatic Detection of Current Sensors for Easy Use
    • Measured Readings Stored onto SD Card for easy Analysis on PC
    • WiFi Communications and Integrated Web Server for Remote Connectivity, Viewing and Diagnostic Troubleshooting
    • Powered by the Measuring Phase with Battery Backup
    • DataView Software for Configuration, Real-Tme Data Display, Data Analysis and Reporting 

    Includes (2) MiniFlex MA193-10-BK Sensors, Soft Carrying Bag, (3) Black Test Leads with Aligator Clips, 110V US Power Cord, Adapter for Power Cord, 8 GB SD Card, USB SD Card Reader, (2) AAA Rechargeable Batteries and DataView Software

per page
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.