Dent Instruments ELITEpro XC Portable Power Meter
- Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd
- Built-in USB and Ethernet Ports
- (4) Current (up to 6000 Amps) and (3) Voltage (0 to 600 Volts AC or DC) Channels
- (4) Analog Inputs for Voltage or Current, Temperature or Process Control Conditions
- Reports Total Harmonic Distortion (THD), Crest Factor, Peak Voltage and Current
- Line Powered and Draws Power from the USB Cable When Connected to a Computer
- Recorded Readings Are Stored Internally onto 16MB of Non-Volatile Memory
- (3) 2-Position and (1) 3-Position CT Connector Inputs
- ELOG™ Software for ElitePro XC for Set-up, Data Retrieval, Analysis and Export
Includes Soft-Side Carrying Case, NIST-Traceable Calibration Certificate, 1.6 Meter USB Cable and Voltage Lead Set with Transformer. Software Available As A Download
Overview of the Dent Instruments ElitePro XC Recording Power Meter
The ElitePro XC™ Portable Power Data Logger is an ideal portable solution for identifying energy usage and recording performance metrics. It can measure and store electrical consumption data for analyzation by monitoring voltage and current inputs. The ElitePro XC™ is the perfect tool for performing energy audits, allowing you to capture kWh/kW energy and demand data and virtually all other relevant energy parameters which can be used for diagnostics and monitoring on single and three-phase circuits. Dent Instrument's ELOG™ software makes it easy to set up and use the device. You’ll receive a carrying case, calibration certificate, USB cable and other accessories with every Dent Elite Pro XC.
ElitePro EXC Power Meter Specifications
| Energy Measurements | Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA, kVAh, Displacement Power Factor (dPF) Note: Per Phase and System Total for Each Parameter |
| Analog Measurements | 0 to 10 Volts, 0 to 20 mA, 4 to 20 mA Current Loop. Non-isolated, External Power for Current Loop. User Scaling for Sensor Reporting in Physical Units |
| Service Type | Single Phase (2-Wire and 3-Wire) Three Phase (3-Wire [Delta] and 4-Wire [Wye]) DC Systems |
| Voltage | Number: 3 Channels, CAT III Range: 0 to 600 Volts AC (Line to Line) or 600 Volts DC |
| Current | 4 Channels Voltage Output CTs (0 to 333 mV AC) for Max. Safety Maximum Input: 0 to 666 Volts AC; ±1 VDC |
| Max Current Input | External Transducer Dependent 200% of current trnasducer rating (mv CTs) Mesure up to 6000 Amps with RoCoil CTs |
| Measurement Type | True RMS Using High-Speed Digital Signal Processing (DSP) |
| Line Frequency | DC, 50/60/400 Hz |
| Data Storage Capacity | 16MB of Internal non-Volatile Memory Capable of Storing 160 Days of Readings |
| Sampling Rates | Waveform: 12 kHz (16-Bit) Sampling Rate Channel: 0.125 Seconds |
| Integration Period | 1, 3, 15, 30 seconds; 1, 2, 5, 10, 15, 20 and 30 Minutes; 1 and 12 hours; 1 day |
| Accuracy | <1% (<0.2% Typical) for V, A. kW, kVAR, kVA, PF, Analog |
| Resolution | Amp: 0.01 Volt: 0.1 Watt: 1 VAR: 1 VA: 1 Power Factor: 0.01 Analog: 0.01 |
| LED Indicators | 1 LED indicates Communication 4 LEDs for Correct Phasing (Green = Voltage and Current on Same Phase; Red = Incorrectly Wired)* 2 LED I/O Indicators *NOTE: Patented PhaseChek™ LED Indicators Guarantee Correct CT Orientation During Installation |
| Communications | USB: USB Cable Connects to PC Running ELOG Software Ethernet: Existing LAN Connects ElitePro XC to Computer Note: Initial Configuration Requires USB Connection to ElitePro XC from PC |
| Power | Line Power Supply: L1 Phase to L2 Phase. 80-600 Volts AC CAT III 50/60 Hz or DC 70 mA Max. Non-User Replaceable 0.5 Amp Internal Fuse Protection Power In: 6 to 10 Volts DC Max, 500 mA Min. (Optional) Power Out: 6 Volts DC, 200 mA Maximum |
| Operating Range | Temperature: -7°C to 60°C (20°F to 140°F) Humidity: 5 to 95% RH, non-condensing |
| Enclosure | ABS Plastic with 94-V0 Flammability Rating |
| Standards Compliance | CE, UL |
| OS Compatibility | Windows 11, 10 and 7 (32 and 64 Bit) |
| Weight | 340 grams (12 Oz.) - Excluding Sensors and Leads |
| Dimensions | 216mm x 63mm x 47mm (8.5" x 2.5" x 1.9") |
