Dent Instruments ELITEpro XC

Dent Instruments Power Meter Records up to (4) Single Phase or (1) Three Phase Delta or Wye Load
In Stock
  • Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd
  • Built-in USB and Ethernet Ports with a WiFi Communication Port Option
  • (4) Current (up to 6000 Amps) and (3) Voltage (0 to 600 Volts AC or DC) Channels
  • (4) Analog Inputs for Voltage or Current, Temperature or Process Control Conditions
  • Reports Total Harmonic Distortion (THD), Crest Factor, Peak Voltage and Current
  • Line Powered and Draws Power from the USB Cable When Connected to a Computer
  • Recorded Readings Are Stored Internally onto 16MB of Non-Volatile Memory
  • (3) 2-Position and (1) 3-Position CT Connector Inputs
  • ELOG™ Software for ElitePro XC for Set-up, Data Retrieval, Analysis and Export
  • New! Mobile App for Access to Real-Time Data from Wi-Fi Enabled Elite Pro Meter

Includes Soft-Side Carrying Case, NIST-Traceable Calibration Certificate, Crocodile Voltage Clips, 1.6 Meter USB Cable and Voltage Lead Set with Transformer. Software Available As A Download

Add to Quote

Overview of the Dent Instruments ElitePro XC Recording Power Meter

The ElitePro XC™ Portable Power Data Logger is an ideal portable solution for identifying energy usage and recording performance metrics. It can measure and store electrical consumption data for analyzation by monitoring voltage and current inputs. The ElitePro XC™ is the perfect tool for performing energy audits, allowing you to capture kWh/kW energy and demand data and virtually all other relevant energy parameters which can be used for diagnostics and monitoring on single and three-phase circuits. Dent Instrument's ELOG™ software makes it easy to set up and use the device. Optional WIFI communication module and mobile app allow real-time remote data monitoring. You’ll receive a carrying case, calibration certificate, USB cable and other accessories with every Dent Elite Pro XC.

ElitePro XC Power Meter Specifications

Energy Measurements Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA, kVAh, Displacement Power Factor (dPF)
Note: Per Phase and System Total for Each Parameter
Analog Measurements 0 to 10 Volts, 0 to 20 mA, 4 to 20 mA Current Loop. Non-isolated, External Power for Current Loop. User Scaling for Sensor Reporting in Physical Units
Service Type Single Phase (2-Wire and 3-Wire)
Three Phase (3-Wire [Delta] and 4-Wire [Wye])
DC Systems
Voltage Number: 3 Channels, CAT III
Range: 0 to 600 Volts AC (Line to Line) or 600 Volts DC
Current 4 Channels
Voltage Output CTs (0 to 333 mV AC) for Max. Safety
Maximum Input: 0 to 666 Volts AC; ±1 VDC
Max Current Input External Transducer Dependent
200% of current trnasducer rating (mv CTs)
Mesure up to 6000 Amps with RoCoil CTs
Measurement Type True RMS Using High-Speed Digital Signal Processing (DSP)
Line Frequency DC, 50/60/400 Hz
Data Storage Capacity 16MB of Internal non-Volatile Memory Capable of Storing 160 Days of Readings
Sampling Rates Waveform: 12 kHz (16-Bit) Sampling Rate
Channel: 0.125 Seconds
Integration Period 1, 3, 15, 30 seconds; 1, 2, 5, 10, 15, 20 and 30 Minutes; 1 and 12 hours; 1 day
Accuracy <1% (<0.2% Typical) for V, A. kW, kVAR, kVA, PF, Analog
Resolution Amp: 0.01
Volt: 0.1
Watt: 1
VAR: 1
VA: 1
Power Factor: 0.01
Analog: 0.01
LED Indicators 1 LED indicates Communication
4 LEDs for Correct Phasing (Green = Voltage and Current on Same Phase; Red = Incorrectly Wired)*
2 LED I/O Indicators
*NOTE: Patented PhaseChek™ LED Indicators Guarantee Correct CT Orientation During Installation
Communications USB: USB Cable Connects to PC Running ELOG Software
Ethernet: Existing LAN Connects ElitePro XC to Computer
WiFi: Connect to PC Using Existing Wireless Network with Internal (75ft to 300 ft Distance) or External (150ft to 300 ft) Antenna
Bluetooth: Connects to PC with Bluetooth Adapter and SPP with 10 to 100 ft Range
Note: Initial Configuration Requires USB Connection to ElitePro SP from PC
Power Line Power Supply: L1 Phase to L2 Phase. 80-600 Volts AC CAT III 50/60 Hz or DC 70 mA Max. Non-User Replaceable 0.5 Amp Internal Fuse Protection
Power In: 6 to 10 Volts DC Max, 500 mA Min. (Optional)
Power Out: 6 Volts DC, 200 mA Maximum
Operating Range Temperature: -7°C to 60°C (20°F to 140°F)
Humidity: 5 to 95% RH, non-condensing
Mobile App Compatible with Wi-Fi Version Only
Mobile Devices with Android 2.1+
Download from Google Play
Enclosure ABS Plastic with 94-V0 Flammability Rating
Standards Compliance CE, UL
Software Compatible Windows 10, 7 (32 or 64 Bit), Vista, XP (32 or 64 Bit)
Weight 340 grams (12 Oz.) - Excluding Sensors and Leads
Dimensions 216mm x 63mm x 47mm (8.5" x 2.5" x 1.9")
Write Your Own Review
You're reviewing:Dent Instruments ELITEpro XC
Your Rating
Customer Questions
What is the sample rate per cycle.

The ElitePro XC logger has a sample rate of 12 kHz waveform and .125 second channel sample rate.

It's primary design is to give you consumption over a period of time more than catch transient events. 

Where do you connect the meter for recording of current, power etc.

The DT80 doesn't not have a built in amplifier so if you require one you would have to use an external one.

Here is the information on the excitation voltage it supplies:

Analog Channels: Selectable 250µA or 2.5mA Precision Current Source, 4.5V Voltage Source, or Switched External Supply

General Purpose: Switchable 12V Regulated Supply for Powering Sensors & Accessories (Max. 150mA)

any directional property for CT polarity

There are no internal settings to the meter that you can change that will alter the CT polarity/directionality.  This is only done physically, either by swapping the polarity of the leads where they physically connect to the meter, or by flipping the CT orientation where it connects around the conductor.  I would recommend you checkout the PowerScout HD 48 by Dent Instruments for this functionality. 

Do we need to calibrate power meter?

This device is designed to meet the specifications for accuracy out of the box without any additional calibration or adjustment required.

Did you find what you were looking for?
Copyright © 2022 MicroDAQ, LLC. All Rights Reserved.