Lascar Humidity and Temperature Data Logger with Display

SKU
EL-SIE-2
In Stock
$103.49
  • Measure and Record Humidity and Temperature -18°C to 55°C Using Internal Sensor with ±0.2°C
  • Logs over 1 Million Temperature Readings onto non-Volatile Internal Memory
  • LCD Display Shows Current Temperature Readings, Min and Max Readings, Battery Level and Alarm Status
  • User-Programmable Visual LED and Audible Alarm Thresholds (Max and Min)
  • No Software to Download, Simply Configure Using Browser
  • Recorded Readings Stored to EasyLog Cloud for Viewing on Any Device or Browser

Includes (2) AAA Alkaline Batteries, Mounting Bracket and USB Cable

Overview of the Lascar EL-SIE-2 Temperature & Humidity Data Logger

The Lascar EL-SIE-2 temperature & humidity data logger is a flexible, easy to use solution for monitoring in home and office settings. The EL-SIE-2 can monitor temperature from -18°C to +55°C (-0.4°F to +131°F) with an accuracy of +/-0.3°C and humidity from 0 to 100%rH with an accuracy of +/-2.0% rH. The logger features onboard software which means there’s nothing to install on your PC or Mac. Simply connect the logger with a USB cable and access the device via any web browser. The onboard software allows you to easily configure the device and view/analyze data. The clear and bright display shows you at-a-glance current readings and logging status. The EL-SIE series of loggers are perfect for facilities and building management, logistics, warehouse monitoring, museums, and clean rooms. The logger is powered by 2 standard AAA batteries which powers logger for at least a year.

Looking for something similar with higher accuracy? Check out the EL-SIE-2+.

Lascar Electronics EL-SIE-2 Humidity and Temperature Data Logger with Display Specifications

Humidity Measurement Range: 0 to 100% RH
Accuracy: ±2.0% Typical (0 to 100% RH)
Resolution: 0.1%
Long Term Stability: <0.25%RH/year Typical
Temperature Measurement Range: -18°C to 55°C (-0.4°F to 131°F)
Accuracy: ±0.3°C (±0.54°F) Typical
Resolution: 0.01
Long Term Stability: <0.03°C (<0.054°F)/year
Measurement Units: °C, °F and K
Dew Point Accuracy: 1.7°C Typical (40% RH to 100% RH)
Logging Rate 10 Seconds to 24 Hours, User-Selectable
Start Modes Immediate, Push-to-Start, Delayed Start, Parameter Triggered
Data Storage Capacity Over 1 Million (1,000,000) Recorded Readings when Internet Connection Not Available
Sounder Integrated Alarm Sounder
Power Source (2) AAA Alkaline 1.5 Volt Batteries (User-Replaceable)
Battery Life >1 Year (@25°C with 10 Minute Logging Rate)
Operating Range Temperature: -18°C to 55°C (-0.4°F to 131°F)
Standards Compliance IP4X
Dimensions 93mm x 42mm x 17mm (3.66" x 1.65" x 0.66")
Customer Questions
Is the software compatible with Windows 10?
Yes, it will work with Windows10
"(2) AAA Lithium Batteries" This unit includes Two rechargeable batteries? Unit will charge as its connected to a PC?
The EL-SIE series loggers are powered via standard AAA batteries.  They are not rechargeable.   The typical battery life for the logger is 1 year if used at room temperature with a 10 minute sample rate.
Is it possible to adjust them in case of a deviation?
There is no way for the end user to apply an offset for this device.  However, if you were to send it in for calibration we would be able to apply an offset if one is needed.  In most cases this is rarely needed. Generally speaking temperature...
Does a new unit come with calibration? It appears that the calibration certificate is an option and the data that we will collect may end up being used in court so we will need to make sure it is as accurate as possible.
No, if you would like a calibration certificate with the device it must be purchased separately. Please keep in mind that the calibration certificate is a validation that the device is working within its specification of accuracy. It’s generally only...
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.