Overview of the Lascar EL-WIFI-DTC Dual Channel Thermocouple Data Logger
The Lascar EL-WIFI-DTC is a dual channel, cloud-enabled, wireless thermocouple data logger designed for a wide range of indoor and outdoor applications. The logger can monitor and record temperature from 0°C to +200°C (32°F to +392°F) with two included K Type thermocouple probes. The EL-WIFI-DTC has dual inputs and is compatible with any third-party K, J, or T Type thermocouple sensors. The logger is configured using the free EasyLogCloud app available for both iOS and Android. The EL-WIFI-DTC can be configured with high and low temperature thresholds and alarm notifications can be through email, audible alarms, or flashing LED. The EasyLogCloud web service is free for your first device and then has a minimal charge for additional devices.
Type: K Measurement Range: 0°C to 200°C (32°F to 392°F) Accuracy: ±1.5°C Cable Length: 1500 mm (59.05") Probe Length: 100 mm (3.93")
Data Storage Capacity
Up to 30 Days of Samples at 10 Second Interval Note: If WiFi Connectivity is Not Available. Once Restored, Data is Wirelessly Transmitted to PC or Cloud, Depending on Setup and Configuration
Sampling Rate
10 Second to 12 Hours
Transmission Rate
1 Minute to 24 Hours How often Data is Transmitted Back to the PC Using Existing WiFi Network
Operating Range
Temperature: -20°C to 60°C (-4°F to 140°F)
Power Source
Rechargeable Lithium Polymer Battery
Battery Life
Typically Greater than 6 Months Note: Dependant on Sampling Rate and Environment
OS Compatibility
Desktop PC: Windows 11, 10 and 7 (64-Bit and 32-Bit Versions) NOTE: EasyLog 21CFR Wi-Fi PC Software for Initial Setup or Local Storage of Data Mobile/Tablet: Android (Available on Google Play) and iOS (Available on App Store)
Display Functions
Current, Min and Max Readings, Battery Life, Wireless Signal Strength, Alarm Event Status, Probe Connection Status, Maximum Logged Temperature Minimum Logged Temperature
Alarm and Alerts
Visual - Blinking LED Cloud-Based Storage and Service Provides Additional Email Alerts Not Available on PC Software
Can this (EL-WIFI-DTC) unit be left plugged in to a USB power source for continual operation without the need to recharge?
Yes, all of the loggers in the EL-WIFI series can be left plugged in via a USB power source for continual operation without needing to recharge.
We generally recommend doing this for critical operations when you might not want to risk a low battery or...
How many devices can I use with the PC WIFI sensor logging software?
There isn't any set limit to the number of devices you can use. The only limiting factor would be the strength of your WIFI network.
Please, mind that only logged in users can submit questions
