The store will not work correctly when cookies are disabled.
Sensors and Probes
-
T-CON-ACT-150
- Self-Powered Transformer for Monitoring Sine Wave, Single-Phase AC Voltage
- Available in 0 to 150 or 0 to 300 Voltage Measurement Ranges
- Sensor Accuracy of < ±0.1% of Span with <240 msec Response Time
- 0 to 20 mA Output and Rated for Indoor Use Only
- Plastic Polycarbonate Housing with Standard 35mm DIN Rail Mounting
Requires 4-20 mA Cable (#CABLE-4-20MA)
NOTE: These Sensors Tie Directly into the Line And Should be Used Only By Qualified Personnel!
-
S-VIA-CM14
- 0 to 5 Volts DC Measurement Range
- Measurement Accuracy: ±10 mV ±0.3% of Reading
- Resolution: ±1.221 millivolts
- Input impedance: 1 Megohms
- Ground connection: same for adapters and PC interface
-
S-CIA-CM14
- 4 to 20 mA Measurement Range
- Measurement Accuracy: ±40 µA ±0.3% of Reading
- Resolution: ±4.93 µA
- Input impedance: 124 ohms
- Provides a Trigger Signal for Controlling Power to Attached External Sensors
-
CTV-C
- Log AC Current in the 0 to 100 Amp Range
- 600 Volts AC Rating
- Constructed of Molded Plastic for Indoor Use
- Window Size: 1.10" x 0.90"
- Dimensions: 2.9" x 2.58" x 1.04"
-
CTV-A
- Log AC Current in the 0 to 20 Amp Range
- 600 Volts AC Rating
- Constructed of Molded Plastic for Indoor Use
- Window Size: 1.10" x 0.90"
- Dimensions: 2.9" x 2.58" x 1.04"
-
CTV-D
- Log AC Current in the 0 to 200 Amp Range
- 600 Volts AC Rating
- Constructed of Molded Plastic for Indoor Use
- Window Size: 1.54" x 1.26"
- Dimensions: 3.92" x 4.72" x 1.14"
-
CTV-B
- Log AC Current in the 0 to 50 Amp Range
- 600 Volts AC Rating
- Constructed of Molded Plastic for Indoor Use
- Window Size: 1.10" x 0.90"
- Dimensions: 2.9" x 2.58" x 1.04"
-
CTV-E
- Log AC Current in the 0 to 600 Amp Range
- 600 Volts AC Rating
- Constructed of Molded Plastic for Indoor Use
- Window Size: 2.92" x 2.46"
- Dimensions: 5.3" x 5.91" x 1.12"
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.