Reed Instruments Meters, Data Loggers, Multimeters, Inspection Cameras and Power Meters

Items 1-8 of 14

Set Descending Direction
Page
per page
  1. R5002 High Voltage Insulation Tester
    R5002
    • Test Voltages of 500V, 1000V, 2500V and 5000V and Measure Insulation Resistance to 60 GΩ
    • AC/DC Voltage from 0 to 600 Volts with Min/Max, Peak and Relative Functions
    • Dielectric Absorption Ratio Measurements (DAR)
    • Backlit LCD Display with Analog Bargraph
    • Timer Function for Insulation Resistance Measurements (1 to 15 minutes)
    • User-Replaceable (8) C Batteries with Optional AC Adapter

    Includes Test Leads (Black, Green, Red), Alligator Clips (Black, Green, Red), AC Adapter, (8) C Batteries and R8888 Hard Carrying Case

  2. REED R9930 Air Particle Counter
    R9930
    • Quick and Accurate Measurements of Particle Sizes as Small as 0.3µm
    • Also Measures Akmbient Air Temperature, Humidity, Dew Point and Wet Bulb
    • 2.8" TFT Color LCD Display 
    • Built-in Camera Allows for Taking Phots and Recording Video
    • Export Captured Videos, Images and Logs to PC with USB Cable or MicroSD Card

    Includes AC Adapter, USB Cable, Zero Count Filter, 7.4 Volt Lithium Battery, 8GB SD Card, Protective Cap, Factory Calibration Certificate, PC Software and Hard Carrying Case

  3. Vibration Meter w/ SD Card Slot for Data Logging
    R7000SD
    • Acceleration & Vibration Measurement with Frequency Range Meeting ISO 2954 Standards (10-200r/s)
    • Recorded Data Logs to SD Card with Easy Analysis Using Microsoft® Excel®
    • Backlight LCD Display Shows Current, Min and Max Readings and Battery Status
    • 1 Second to 1 Hour User-Selectable Sampling Rate
    • No Software Required, Data Logs to SD Card (Sold Separately)
    • Battery-Powered with Optional AC/DC Powered Adapter (#RSD-ADP-NA) Available

    Includes Vibration Sensor with 1.2 Meter (3.93 ft) Cable, and Hard Carrying Case

  4. Indoor Air Quality Meter w/ SD Card Slot for Data Logging
    R9910SD
    • Simultaneously Measure Readings from 3 Separate Probes (Temp/RH, CO2, CO or O2)
    • Recorded Data Logs to SD Card with Easy Analysis Using Microsoft® Excel®
    • 2 Seconds to 8 Hour User-Selectable Sampling Rate
    • LCD Display Shows Current Readings, Max and Min Readings, Alarm and Battery Status
    • 35 Hrs to 120 Hrs of Typical Battery Life (Dependant Upon Environment, Display and Sampling Rate)
    • Powered by (6) AA Alkaline User-Replaceable Batteries

    Includes Temp/RH, CO2, CO and O2 Sensors. Hard Carrying Case and (6) AA Batteries

Page
per page
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.