Sensors and Probes

• Measure Air Temperature in Clean Indoor Environment
• Enables Temperature Monitoring at a Location Away from the Sensaphone Unit
• Programmable High/Low Alarms
• Recommended to be Located in Clean, Dry Environments
• Requires Cable (#FGD-0010)

• Small Sealed General Purpose Temperature Probe for Indoor/Outdoor Use
• Temperature Range of -85°C to 140°C (-121°F to 176°F)
• Suitable for Wet, Dry or Dirty Environments
• Compatible with Sensaphone Units
• Includes 12 ft Cable and Mounting Hardware

• Temperature Range of -85°C to 140°C (-121°F to 176°F)
• Buffers Momentary Temperature Fluctuations
• Prevent Alarm Dial Out for Defrost Cycles, Opening of Doors and Fans Circulating Air
• Ideal for Cold Storage Temperature Monitoring

• Sensor for Monitoring Fluid Levels
• Can be Rotated for Normally Open or Normally Closed Operation
• Installing 2 Switches at Different Levels Allows for High and Low Level or Pump Control or Alarm
• Ideal for Level Control Applications in Small Tanks
• Operating Range of -23°C to 26°C (-10°F to 80°F)

• Allows you to Control Temperature Between 2 Set Points
• Compatible with Sensaphone 400 and 800 Remote Monitors
• LCD Readout Display
• Requires the XFR-0024 Power Supply

• Measures Ambient Temperature with 2.8K Thermistor Sensor
• 0°C to 50°C Temperature Measurement Range
• Attach an External Temperature Probe for Wider Temperature Measurement Range
• Built-in Radio Transmitter for Monitoring Wherever the Device is Installed
• Powered by (2) AA Batteries with 2 Year Battery Life

Includes Temperature Sensor, (2) AA Batteries and Mounting Kit

Requires Purchase of (#FGD-WSG30) WSG30 Wireless Monitoring System

• Monitor any Current Loop with 24 Volt Powered 4-20 mA Sensor to Transducer (Sold Separately)
• Powered by (2) AA Batteries with 2 Year Battery Life
• Built-in Radio Transmitter for Monitoring Wherever the Device is Installed
• Included Batteries will Power the Sensor for Several Hours if the Main AC Power Fails
• Compatible with WSG Wireless System

Includes 4-20mA Sensor, 5 Volt DC Power Supply, (2) AA Batteries and Mounting Kit

Requires Purchase of (#FGD-WSG30) WSG30 Wireless Monitoring System

• Measure CO Levels from 0 to 300 ppm with a Sensaphone Monitor
• -20°C to 50°C Operating Range with ±5% ppm Accuracy
• Compatible with Any Sensaphone That Accepts a 4-20mA Input Signal
• Requires a 24 Volts DC Power Supply to Operate (#FGD-0053)