Data Loggers
-
RTR-574
- Simultaneously Measure and Record Illuminance, Ultraviolet (UV), Temp and Humidity
- Stores 8,000 Data Samples Between Wireless Transmissions to Base Collector or Repeater
- 150 Meters Line of Sight Transmission Range Between Devices (Logger to Base Collector or Repeaters)
- Automatic Transmission of Data (Current or Logged) at Set Interval to Base Collector or Repeater
- View Current Readings, Cumulative Illuminance and Cumulative Amount of UV Light on 4 Digit LCD Display
Includes Logger, AA Alkaline Battery, USB Cable, PC Software, User Manual and Sensors w/ 10 Meter Cable
A Complete System Requires a Base Collector (RTR-500DC, RTR-500MBS-A, RTR-500NW or RTR-500AW) and a RTR-500 Series Wireless Data Logger
-
MCR-4V
- Measure and Record Voltage Readings in 4 Different Measurement Ranges Up to 24 Volts DC
- Data Transfered to PC for Analysis Using USB (Cable Included) or SD Card
- Touch Panel for Setup and Configuration Changes in the Field
- 4 Units Can be Coupled Together for up to 16 Channel Recording Simultaneously
- LCD Display Shows Current Readings, Trend Graph, Battery Status and Configuration Settings
Includes (2) AA Alkaline Batteries, USB Cable, PC Software, Card Slot Cover and User Manual
-
RTR505B
- Wireless Input Module Accepting Temperature, Voltage, Current and Pulse Count Sensors (Sold Separately)
- Stores up to 16,000 Data Samples Between WirelessTransmissions to Base Collector or Repeater
- 150 Meters Line of Sight Transmission Range Between Devices (Logger to Base Unit or Repeaters)
- Automatic Transmission of Data (Current or Logged) at Set Interval to Base Unit or Repeater
- Compatible with the Free TandD WebStorage Cloud Service for Viewing your Recorded Readings Anywhere, Anytim
Requires a RTR-500B Wireless Input Module for Temperature, Voltage, Current or Pulse Count
Includes Data Logger, 1/2 AA Lithium Battery, Strap and User Manual
A Complete System Requires a Base Collector (RTR500DC, RTR500BC, RTR500BW or RTR500MBS-A) and a RTR500B Series Wireless Data Logger
-
RTR-574-S
- Simultaneously Measure and Record Illuminance, Ultraviolet (UV), Temp and Humidity
- Stores 8,000 Data Samples Between Wireless Transmissions to Base Collector or Repeater
- 150 Meters Line of Sight Transmission Range Between Devices (Logger to Base Collector or Repeaters)
- Automatic Transmission of Data (Current or Logged) at Set Interval to Base Collector or Repeater
- View Current Readings, Cumulative Illuminance and Cumulative Amount of UV Light on 4 Digit LCD Display
Includes Logger, AA Alkaline Battery, USB Cable, PC Software, User Manual and Sensors w/ 10 Meter Cable
A Complete System Requires a Base Collector (RTR-500DC, RTR-500MBS-A, RTR-500NW or RTR-500AW) and a RTR-500 Series Wireless Data Logger
-
RTR-576-S
- Simultaneously Measure and Record Carbon Dioxide, Humidity and Temperature Readings
- Measurement Range of 0 to 9,999ppm (CO2); 0% to 99% RH (Humidity) and -25°C to 70°C (Temp)
- Stores 8,000 Data Samples Between Wireless Transmissions to Base Collector or Repeater
- 150 Meters Line of Sight Transmission Range Between Devices (Logger to Base Collector or Repeaters)
- Automatic Transmission of Data (Current or Logged) at Set Interval to Base Collector or Repeater
Includes Logger, (4) AA Alkaline Battery, External Temp/RH Sensor, AC Adapter, USB Cable and User Manual
A Complete System Requires a Base Collector (RTR-500DC, RTR-500GSM, RTR-500NW or RTR-500AW) and a RTR-500 Series Wireless Data Logger
Wireless Notice and Disclaimer
The use of Radio Frequency products is tightly regulated by local laws. Wireless products sold by MicroDAQ, LLC are approved for use in the U.S. and Canada, but may not be in other countries. It is the sole responsibility of our customers to insure that the local use of wireless products purchased on this site is in full compliance with all local laws and regulations. MicroDAQ, LLC and the manufacturers it represents will not accept any responsibility for the use of unapproved wireless product in other countries. -
TR-76UI-S
- Measures and Records Carbon Dioxide (CO2), Temperature and Humidity in Indoor Environments
- 0 to 5,000 ppm (CO2), -25°C to 70°C (Temp) and 0 to 99% RH (Humidity) Measurement Ranges
- Programmable Alarms and Contact Closure Output
- Large LCD Display will Cycle Through all Three Measurements
- Perfect for Air Quality Monitoring and IAQ Auditing
Includes Sensors, Software, (4) AA Alkaline Batteries, USB Cable and AC Adapter
-
TR-74UI-S
- Simultaneously Measure and Record Illuminance, Ultraviolet (UV), Temp and Humidity
- Record and Store up to 8,000 Measured Samples
- User-Selectable Sampling Interval of 1 Second to 60 Minutes
- Internal 2 Point Adjustment Function
- View Current Readings, Cumulative Illuminance and Amount of UV Light on 4 Digit LCD
Includes Battery, USB Cable, PC Software, User Manual and Sensors w/ 1.5 Meter Cable