Bluetooth and USB Data Acquisition Device w/ 8 Analog Inputs
Measurement Computing Bluetooth and USB-based 8 Channel Data Acquisition Device
SKU
BTH-1208LS
$259.00
- (8) Analog Inputs, (2) Analog Outputs, (8) Digital Inputs/Outputs and (1) Event Counter
- Bluetooth (Paired with Host Device) and USB Operation Modes for Transmission of Data
- Aggregated Sampling Rate up to 1 kS/s (Bluetooth - Continuous Scan) or 50 kS/s (USB or Bluetooth - Burst Mode) across all channels
- Software Selectable Analog Input Ranges of ±10 Volts (Single-Ended) or up to ±20 Volts (Differential)
- USB and Battery Powering Options with Battery Recharging Capability
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
Due to product shortages lead times on most Measurement Computing orders will range from 7-16 weeks.
Overview of the Measurement Computing BTH-1208LS Bluetooth DAQ Device
Record, monitor and analyze a variety of data in over Bluetooth or USB with the BTH-1208LS. This Measurement Computing DAQ can be paired to the host device using Bluetooth or USB connections to transmit data to your computer. With eight single-ended (SE) or four differential (DIFF) analog inputs, two 12-bit analog outputs, eight digital I/O’s, and one 32-bit counter input the BTH-1208LS is a very versatile DAQ device. And by using Bluetooth, you’ll have continuous data scanning.
Measurement Computing BTH-1208LS Bluetooth DAQ Module Specifications
Analog Input | A/D Converter: Successive Approximation Type Channels: 8 (Single-Ended); 4 (Differential) Input Voltage Range: ±10 V (SE); -10 to 20 V (Diff) Input Impedance: 140 kΩ Resolution: 11 Bits (Single-Ended); 12-Bits (Differential) Throughput (Software Paced): 10 S/s (BT); 250 S/s (USB) Throughput (Continuous Scan): 1024 S/s (BT); 50 kS/s (USB) Throughout (Burst): 0.014 S/s to 50 kS/s to 12K Sample FIFO NOTE: Bluetooth Transfer Rate to Host is Limited to 1024 S/s |
Analog Output | Channels: 2 Output Range: 0 Volts to 2.5 Volts Resolution: 12 Bits Throughput (Software Paced): 10 S/s Slew Rate: 0.75 V/µs Typical |
Digital Input/Output | Number of I/O: 8 (Individually Configured) Digital Type: 3.3 Volts Open Drain Input Voltage Range: 0 to 5.5 Volts Input Threshold: 2.0 Volts (High Voltage); 0.8 Volts (Low Voltage) Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage) Output Voltage Range: 0 to 5.5 Volts (0 to 3.5 Volts with No External Pull Up Resistor) |
External Trigger | Trigger Mode: Software Configurable for Edge or Level Sensitive Trigger Latency: 10 µs Max Trigger Pulse Width: 1 µs Min Input Type: Schmitt Trigger, 47 kΩ Pull-down to ground Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max) Input Voltage Range: 0 to 5.5 Volts Input Threshold: 1.74 Volts (High Voltage); 0.98 Volts (Low Voltage) Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage) |
External Clock Input | Input Clock Rate: 50 kHz Max Clock Pulse Width: 1 µs Min Input Type: Schmitt Trigger, 47 kΩ Pull-down to ground Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max) Input Voltage Range: 0 to 5.5 Volts Input Threshold: 1.74 Volts (High Voltage); 0.98 Volts (Low Voltage) Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage) |
Counter | Counter Type: Event Counter Channels: 1 Input Type: Schmitt Trigger, 47 kΩ Pull-down to ground Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max) Resolution: 32-Bit Input Frequency: 1 MHz (Max) Pulse Width: 500 ns (High); 500 ns (Low) Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max) Input Threshold: 1.74 Volts (High Voltage); 0.98 Volts (Low Voltage) Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage) |
Memory | Non-Volatile EEPROM with 2048 bytes Storage |
Power Source | USB Port or (2) AA Alkaline, NiCd or NiMH Cells |
Bluetooth | Type: Bluetooth 2.1 Compatibility: Bluetooth 2.0, 1.2 and 1.1 Profile: Serial Port Porfile (SPP) Note: The Bluetooth Radio is Disable when Device is Connected to a USB Host |
USB Device | Type: USB 2.0 Full Speed Compatibility: USB 1.1 and USB 2.0 Cable Length: 3 Meters Maximum |
Operating Range | Temperature: 0 to 50°C Humidity: 0 to 90% RH Non-Condensing |
Storage Range | Temperature: -40°C to 70°C Humidity: 0 to 90% RH Non-Condensing |
OS Compatibility | Windows 11, 10 and 7 (32 and 64-Bit) for Universal Library, LabVIEW |
Dimensions | 14.6 cm x 8.1 cm x 2.71 cm (5.77" x 3.25" x 1.07") |
Customer Questions