4-Channel High Speed Counter/Timer Device with Digital I/O

SKU
USB-CTR04
$419.00
  • High Speed Pulse Counter for General Counting Applications
  • 4 Channel Inputs with 8 MB/s Aggregate Scan Rate
  • Supports Multiple Input Modes: Totalize, Period, Pulse Width and Timing Measurements
  • 8 Digital Configurable I/O Channels
  • Powered by +5 Volt USB Power Supply (Self Powered)

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

Due to product shortages lead times on most Measurement Computing orders will range from 7-16 weeks.

Measurement Computing USB-CTR04 4-Channel High Speed Counter/Timer DAQ Device w/ Digital I/O

The Measurement Computing USB-CTR04 offers high-speed counter and timer operations that can be synchronized with digital input/output functions. This 4-channel high speed USB counter/timer device with digital I/O has support for multiple counting modes, debounce filtering, and features high frequency and scan rates. The USB-CTR04 supports software selectable resolution up to 64 bits. Each counter channel provides a connection for counter input, counter output and counter gate. Counter outputs can be used to transmit signals to or control external devices, as well as to another USB-CTR Series device.

Measurement Computing USB-CTR04 High Speed Counter/Timer DAQ Module Specifications

Counter Counters: 4
Counter Type: FPGA
Input Modes: Totalize, Pulse Width, Period, Timing
Mode Options: Non-Recycle, Range Limit, Clear On Read, Up/Down
Resolution: Up to 64-Bits (Software-Selectable)
Input Frequency: 48 MHz (Max.)
Input Type: Schmitt Trigger, 47kΩ pull-down to Ground with 22 &Omega in Series
Schmitt Trigger Hysteresis: 0.76 Volts Typical, 0.4 Volts Min, 1.2 Volts Max
Input High Voltage Threshold: 1.74 Volts Typical, 1.3 Volt Min, 2.2 Volts Max
Input High Voltage Limit: 5.5 Volts Absolute Max
Input Low Voltage Threshold: 0.98 Volts Typical, 0.6 Volt Min, 1.5 Volts Max
Input Low Voltage Limit: -0.5 Volts Absolute Min, 0 Volts Recommended Min
Output Low Voltage: 0.1 Volts Max (IOL = 50µA); 0.44 Volts Max (IOL = 24mA)
Output High Voltage: 4.4 Volts Min (IOH =-50µA); 3.76 Volts Min(IOH =-24mA)
Output Current: 24 mA Max per Pin
Timers Timer Type: PWM Output with Count, Period, Delay and Pulse Width Registers
Internal Clock Frequency: 96 MHz
Effective Frequency Range: 0.022 Hz to 48 MHz
Pulse Width: 10.42 ns Min (High and Low)
Output Low Voltage: 0.1 Volts Max (IOL = 50µA); 0.44 Volts Max (IOL = 24mA)
Output High Voltage: 4.4 Volts Min (IOH =-50µA); 3.76 Volts Min(IOH =-24mA)
Output Current: 24 mA Max per Pin
Digital Input/Output Digital Type: TTL
Number of I/O: 8
Configuration: Bit-Configurable as Input (Power on Default) or Output
Transfer-Rate: 33 to 8000 port reads/writes or single bit reads/writes per second typical, system dependent (System-Paced, Asynchronous)
Input High Voltage: 2.0 Volts Min, 5.5 Volts Absolute Max
Input Low Voltage: 0.8 Volts Max, 0 Volts Recommended Min
Output High Voltage: 4.4 Volts Min (IOH = -50µA); 3.76 Volts Min (IOH = -24mA)
Output Low Voltage: 0.1 Volts Max (IOL = 50µA); 0.44 Volts Max (IOL = 24mA)
Output Current: 24 mA Max per Pin
External Trigger Trigger Source (External Digital): TRIG terminal
Trigger Mode: Edge or Level Sensitive; Software-Selectable for CMOS compatible Rising or Falling Edge, High or Low Level
Trigger Latency: 100 ns Max.
Trigger Pulse Width: 100 ns Min.
Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground with 33 Ω in series
Schmitt Hysteresis: 0.76 Volts typical, 0.4 Volts (Min); 1.2 Volts (Max)
Input High Voltage Threshold: 1.74 Volts typical, 1.3 Volts (Min); 2.2 Volts (Max)
Input High Voltage Limit: 5.5 Volts Absolute Max
Input Low Voltage Threshold: 0.98 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max)
Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended
External Clock Input/Output Clock Frequency: 4 MHz Max (Input and Output)
Clock Pulse Width: 10.417 ns min (Input and Output)
Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground
Schmitt Hysteresis: 0.76 Volts typical, 0.4 Volts (Min); 1.2 Volts (Max)
Input High Voltage Threshold: 1.74 Volts typical, 1.3 Volts (Min); 2.2 Volts (Max)
Input High Voltage Limit: 5.5 Volts Absolute Max
Input Low Voltage Threshold: 0.98 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max)
Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended
Output High Voltage: 4.4 Volts Min.
Output Low Voltage: 0.1 Volts Min
Output Current: 24 mA Max
USB Communications Type: USB 2.0 High-Speed
Compatibility: USB 1.1, USB 2.0, USB 3.0
Cable Length: 3 Meters Max
Power Source USB Port, No External Power Connection
Operating Range Temperature: 0° to 50°C
Humidity: 0 to 90% RH Non-Condensing Max
Storage Range Temperature: -40°C to 70°C
Humidity: 0 to 90% RH Non-Condensing Max
OS Compatibility Windows 11, 10 and 7 (32 or 64-Bit) for Universal Library, LabVIEW
Dimensions 127mm x 89.9mm x 35.6mm (5.00" x 3.53" x 1.40")
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.