WebDAQ 504 Internet Enabled Vibration Accoustic Data Logger
SKU
WEBDAQ-504
$1,569.00
- Stand-Alone Vibration and Acoustic Data Logger with Remote Monitoring and Control
- (4) Simultaneous Analog Inputs Isolated to 250 Volts and (4) Digital IOs for Triggers and Alarms
- Built-in Web Interface for Configuring Applications, Logging Data, Update Digital Outputs, Send Alarm Email/SMS Notifications and View Real-Time Data
- Real-Time FFTs for Continuous Monitoring and AnalysisTriggers and FFT Display
- Ability to Export Recorded Data to csv format for Excel® and MATLAB®
Includes Ethernet Cable, Quick Start Guide, AC Power Adapter with USA, UK and Europe Plugs
Due to product shortages lead times on most Measurement Computing orders will range from 7-16 weeks.
Measurement Computing WebDAQ 504 Internet Enabled Vibration and Acoustic Data Logger Specifications
| Analog Input | Number of Channels: 4 ADC Resolution: 24 Bits Type of ADC: Delta-Sigma (with Analog Prefiltering) Sampling Mode: Simultaneous Internal Master Timebase (Frequency): 13.1072 MHz Internal Master Timebase (Accuracy): ±50 ppm Max Input Coupling: AC/DC, Software-Selectable Input Range: ±5 Volts |
| Digital Input/Output | Digital Type: CMOS (Schmitt Trigger) Input / Open Drain Output Number of I/O: 1 port of 4 bits Configuration: Bit-Configurable for Input or Output Schmitt Trigger Hysteresis: 0.6 Volts (Min); 1.7 Volts (Max) Pull-up Configuration: Each bit is pulled up to 5 Volts with a 100&kOmega; Resistor Input Frequency Range: DC - 10kHz Input High Voltage Limit: 15 Volts Absolute Max Input Low Voltage Limit: -0.5 Volts Absolute Min, 0 Volts Recommended Min Input High Voltage Threshold: 1.9 Volts Min, 3.6 Volts Max Input Low Voltage Threshold: 2.3 Volts Max, 1.0 Volts Min |
| Shock | Operating Shock: 30 g, 11 ms Half Sine; 18 Shocks at 6 Orientations |
| Network Communications | Ethernet Type: 100 Base-Tx, 10-Base-T Communication Rates: 10/100 Mbps, Auto-Negotiated Connector: RJ-45, 8 Position Cable Length: 100 Meters (328 ft) Max IP Configuration: DHCP, link-local, Static |
| USB Communications | Number of USB Ports: 2 (Connecting to Mass Storage Device or Approved WiFi Adapter) Type: USB 2.0 High-Speed Compatibility: USB 1.1, USB 2.0, USB 3.0 Cable Length: 3 Meters Max |
| SD Memory Card Slot | Memory Card Type: SD, SDHC, SDXC, MMC, TransFlash File System Supported: FAT16, FAT32, exFAT, ext2/3/4, NTFS |
| Push Buttons | Power (POWER): Turns the Device On or Off, or Forces the Device to Power Off Function (FUNC): Unmounts External Media, or Starts/Stops an Acquisition Reset (CONFIG RESET): Restores Network and Alarm Settings to Factory Default Values |
| Power | Input Voltage: Center Positive. 6+ Volts DC to 16 Volts DC Input Wattage: 4 W typical, 10 W max External AC Adapter: 9 VDC, 1.2 Amps, 110 VAC to 240 VAC Input Range Battery: One 3 Volt Button Cell Lithium Battery; Replaceable |
| OS Compatibility | Windows 11, 10 and 7 (32 and 64-Bit) for Universal Library, LabVIEW |
| Software | Control and Setup via Web Browser Interface (No Software Required) InstaCal (install, Configure and Test) TracerDAQ (Acquire, View, Log and Generate) |
| Operating Environment | Temperature: 0°C to 50°C (32°F to 120°F) Humidity: 10% to 90% RH, non-condensing |
| Storage Environment | Temperature: -40°C to 85°C (-40°F to 185°F) Humidity: 5% to 95% RH, non-condensing |
| Other Environmental Factors | Maximum Altitude: 2,000 Meters (6,562ft) Pollution Degree: 2 |
| Standards Compliance | IP30 |
| Weight | 680 grams (1.5 lb) |
| Dimensions | 158.8mm x 146.1mm x 38.1mm (6.25" x 5.75" x 1.50") With BNC Connectors: 178.8mm x 146.1mm x 38.1mm (6.97" x 5.75" x 1.50") |
Customer Questions