MSR145 Miniature Signal Data Recorder

Name: MSR145 Miniature Signal Data Recorder
Brand: MSR Electronics
SKU: MSR145
Price: 171.00 USD
Availability: OutOfStock

MSR Electronics Data Recorder Measures and Records Temperature, Humidity, Pressure, Light, Acceleration and 2 or 4 Additional Analog Inputs Available

SKU

MSR145

Please open the Configurator tab to choose your desired options.

Measures Temperature, Humidity, Light, Pressure and Acceleration Simultaneously and 2 or 4 Analog Inputs Also Available
Stores up to 2 Million (Internal Memory) or 1 Billion (SD Card) Total Readings
Rechargeable 230 or 1000 mAh Lithium Polymer Battery
Data from any number of loggers can be merged synchronously into a single Data Record
Accelerometer Range of ±15g with -20°C to 65°C Temperature Range
Made in Switzerland, Swiss Made

Includes Software CD, USB Cable and 4GB microSD Card

Click on the "Configurator" Tab Below to Choose the Ordering Options

MSR Data Loggers are Built to Order and Not Eligible for Return. All Sales Are Final.

Special order - please allow 4 weeks for this item to ship.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

MSR Configurator

With a few clicks you are able to select your desired MSR145.

Select the housing and the corresponding battery.
Select the configuration.
Would you like to expand the memory capacity to over 1 billion measured values?
General technical data of the MSR145 data logger

1. Select the housing and the corresponding battery.

Housing	Type and battery	Size & weight	Medium	Sheat material	Item no.
Standard IP 60	Design housing with 230 mAh battery	27 x 16 x 53 mm (W x H x L) approx. 20 g	Air	PC, not encapsulated	145B15 Error
Standard IP 60	Design housing with 1000 mAh battery	39 x 23 x 72 mm (W x H x L) approx. 56 g	Air	PC, not encapsulated	145B7 Error
Waterproof IP 67	Silicon tube with 230 mAh battery	20 x 14 x 62 mm (W x H x L) approx. 18 g	Air, various liquids	Silicon, encapsulated	145B4 Error
	Design housing with 230 mAh battery	27 x 16 x 53 mm (W x H x L) approx. 27 g	Air, various liquids	PC, encapsulated	145B16 Error
	Design housing with 1000 mAh battery	39 x 23 x 72 mm (W x H x L) approx. 64 g	Air, various liquids	PC, encapsulated	145B8 Error

2. Select the configuration.

You can select various internal sensors as well as up to five external sensors or connectors.

Measured parameter / Measurement/ storage rate	Technical data	Internal	External (according to cable length)
Measured parameter / Measurement/ storage rate	Technical data	Internal	0.20 m	1.00 m	1.60 m
Temperature 1/s to every 12 h	Working range: external: -40...+125 °C internal: -20...+65 °C Max. deviation: ±0.1 °C (-25...+55 °C) ±0.3 °C (-40...+125 °C)	Item no. T9 Error	Item no. FT9/020 Error	Item no. FT9/100 Error	Item no. FT9/160 Error
Temperature 1/s to every 12 h	Working range: -55...+125 °C Max. deviation: ±0.5 °C (10...+70 °C) ±2 °C (-55...+125 °C)	only available externally	Item no. FT2/020 Error	Item no. FT2/100 Error	Item no. FT2/160 Error
Connector for thermal element of Type K (without sensor) 4/s* to every 12 h *(1/s in combination with A4 sensor)	Working range: -200...+1350 °C	only available externally	Item no. FT3/020 Error	Item no. FT3/100 Error	Item no. FT3/160 Error
Humidity with integrated temperature 1/s to every 12 h	Working range: 0...100 % rel. humidity external: -40...+125 °C internal: -20...+65 °C Max. deviation: ±2 % rel. humidity (10...80 %, +25 °C) ±3 % rel. humidity (80...100 %, +25 °C)	Item no. H3 Error	Item no. FH3/020 Error	Item no. FH3/100 Error	Item no. FH3/160 Error
Air pressure absolute, with integrated temperature Internal: 1/s to every 12 h External: 10/s* to every 12 h *(1/s in combination with A4 sensor)	Working range: 10...2000 mbar absolute external: -40...+85 °C internal: -20...+65 °C Max. deviation: ±2 mbar (1% FS) (750...1100 mbar absolute, +25 °C)	Item no. P5 Error	Item no. FP10/020 Error	Item no. FP10/100 Error	Item no. FP10/160 Error
	Working range: 0...14 bar absolute -20...+65 °C Max. deviation: ±50 mbar (1% FS) (1...10 bar abs., +25 °C)	Item no. P7 only available on request	Item no. FP7/020 Error	Item no. FP7/100 Error	Item no. FP7/160 Error
Fluid pressure with integrated temperature Internal: 1/s to every 12 h External: 10/s* to every 12 h *(1/s in combination with A4 sensor) Material in contact with media: Stainless Steel AISI 316L (DIN 1.4404 / 1.4435) O-rings: Viton® 70° Sh	Working range: -1000...3000 mbar relative -20...+85 °C Max. deviation: ±30 mbar (1% FS)	only available externally	Item no. FP9/020 Error	Item no. FP9/100 Error	Item no. FP9/160 Error
	Working range: 0...3000 mbar absolute -20...+85 °C Max. deviation: ±30 mbar (1% FS)	only available externally	Item no. FP3/020 Error	Item no. FP3/100 Error	Item no. FP3/160 Error
	Working range: 0...30 bar absolute -20...+85 °C Max. deviation: ±0.3 bar (1% FS)	only available externally	Item no. FP4/020 Error	Item no. FP4/100 Error	Item no. FP4/160 Error
	Working range: 0...400 bar absolute -20...+85 °C Max. deviation: ±4 bar (1% FS)	only available externally	Item no. FP8/020 Error	Item no. FP8/100 Error	Item no. FP8/160 Error
	Working range: 0...1000 bar absolute -20...+85 °C Max. deviation: ±10 bar (1% FS)	only available externally	Item no. FP12/020 Error	Item no. FP12/100 Error	Item no. FP12/160 Error
3-axis-acceleration (static) 50/s to every 12 h	±15 g -20...+65 °C ±0.15 g (0...5 g, +25 °C) ±0.25 g (5...10 g, +25 °C) ±0.45 g (10...15 g, +25 °C)	Item no. A Error	Item no. FA/020 Error	Item no. FA/100 Error	Item no. FA/160 Error
3-axis-acceleration with Fast Peak (1 kHz) 50/s to every 12 h		Item no. A4 Error	Item no. FA4/020 Error	Item no. FA4/100 Error	Item no. FA4/160 Error
Light 1/s to every 12 h	Working range: 0...83 000 lx Max. sensitivity at 550 nm	Item no. L3 Error	Item no. FL3/020 Error	Item no. FL3/100 Error	Item no. FL3/160 Error
Connection for strain gauges	Characteristics: full bridge rated output 1 mV/V bridge voltage 3 V	only available externally	Item no. FD/020 Error	Item no. FD/100 Error	Item no. FD/160 Error
Analogue inputs (resolution: 12 bit) 50/s* to every 12 h *(1/s in combination with A4 sensor)	Input configuration:	only available externally	Exxxx/020 Error	Exxxx/100 Error	Exxxx/160 Error
Control terminal	Characteristics: Alarm output Input for starting and stopping data recording 3 V voltage output	only available externally	Item no. FY/020 Error	Item no. FY/100 Error	Item no. FY/160 Error

3. Would you like to expand the memory capacity to over 1 billion measured values?

Please order the expansion slot for plugging-in a standard microSD card here.	Item no.
Expansion slot for microSD card (available only for design housing B7 and B8) Please note that: this expansion slot with plugged-in microSD card only meets the protection category IP60, even with the design housing B8, one formatted and ready for use microSD card (≥4GB) is included.	N10006 Error

Your selection:

Price:
Item no.:

Specifications

MSR145 Multifunctional Data Recorder Specifications

Measured Parameters	Temperature Relative Humidity (RH) with Integrated Temp Air Pressure Fluid Pressure 3-Axis Acceleration (ie. Determining Position) Light 2 or 4 Analog Inputs (0 to 3.0 Volts, 12-bit) - Standard Note: Additional Ranges Available 0-20mA, 4-20mA, 0-3, 5, 10, 12, 24, 36, or 48 volt
Acceleration	Range: ±15g @ -20°C to 65°C Accuracy: ±0.15G @ 25°C Resolution: 4mg Response Time: 4mg
Temperature	Range (Internal): -20°C to 65°C Range (External): -10°C to 58°C; -55°C to 125°C; 0 to 1024°C (External Type K TC Connectors) Accuracy (Internal): ±0.5°C Accuracy (External): ±0.1°C (5°C to 45°C); ±0.2°C (-10°C to 58°C); ±0.5°C (-10°C to 65°C), ±2.0°C (-55°C to 125°C) Resolution: 0.034°C Response Time: Approximately 30 Seconds
Humidity	Range: 0 to 100% RH, -20°C to 65°C Accuracy: ±2% (10 to 85% RH, 0°C to 40°C); ±4% (85 to 95% RH, 0°C to 40°C)
Air Pressure	Range: 0 to 2000 mbar Absolute or 0 to 14 Bar Absolute Accuracy: ±2.5mbar (750 to 1100 mbar Absolute, 25°C); ±50 mbar (1-10 bar Absolute, 25°C) Resolution: 15 Bit Response Time: Approximately 1/10 Second
Fluid Pressure	Range: 0 to 3000 mbar Absolute or 0 to 30 Bar Absolute Accuracy: ±30mbar; ±300 mbar Resolution: 15 Bit Response Time: Approximately 1/10 Second
Light	Range: 0 to 65,000 lx Accuracy: 100 to 65,000 lx, Max ±5% Linearity Error, Max Sensitivity at 500 nm Resolution: 4 lx
Analog Input	Number: 2 or 4 (Each Channel Configured for Separate Ranges) Range: 0 to 3.0 Volts (Standard) Resolution: 12 Bits Note: Additional Ranges Available** 0-20mA, 4-20mA, 0-3, 5, 10, 12, 24, 36, or 48 volt
Sampling Rate	Temperature & Humidity: 1/s to 12 Hours Pressure: 10/s to every 12 Hours Acceleration and Analog Input: 50/s to 12 Hours Light Level: 1/s to 12 Hours Analog: 50/s to 12 Hours
Data Storage Capacity	Internal Storage: Approximately 2 Million Total Readings External SD Card: Approximately 1 Billion Total Readings
Operating Mode	Push Button Start/Stop
Storage Conditions	Temperature: 5°C to 45°C Humidity: 10 to 95% RH, non-condensing
LEDs	Blue: Recording Indicator Red: Alarm Indicator Yellow: Battery Charge Indicator
Power Supply	Rechargeable Lithium Polymer Battery (260mAh or 900mAh) (USB Connection to PC recharges unit)
Battery Life	2-3 Months (Sampling Rate: 1 Minute)
OS Compatibility	Windows 11, 10 and 7 (32 and 64 Bit)
Enclosure	Standard Version: Poly Carbonate, Non-Molded Waterproof Version: Silicon, Molded Standard Waterproof Version: Poly Carbonate, Molded
Media	Standard Version: Air Waterproof Version: Air, Various Liquids Standard Waterproof Version: Air, Water
Standards Compliance	RoHS/WEEE, IP60 (Standard Version), IP67 (Waterproof Versions)
Dimensions	Standard Version: 20mm x 15mm x 52mm Waterproof Version (Silicon Tube): 18mm x 14mm x 62mm Standard Waterproof Version: 20mm x 15mm x 61mm
Weight	Standard Version: 16 grams Waterproof Version: 18 grams Standard Waterproof Version: 23 grams

Manuals and Resources

Software Downloads

MSR PC Software

(Size: 255.38 MB)

Version 6.09.01 Includes ShockViewer Add-On for MSR165 and MSR175.

User Manuals and Product Guides

MSR145 User Manual

(Size: 3.05 MB)

Mounting

Mounting Instructions for MSR Shock and Vibration Data Loggers

The data loggers should be force-fitted as close as possible to or on the object to be monitored. Fastening to the packaging or the means of transport will lead to deviating results.

Screw the data loggers to the object at the holes provided. Alternatively, the data loggers can also be fastened with high-strength industrial adhesive tape or cable ties. Magnetic fastening should be avoided. It only acts in the direction of the magnetic field lines - it is not force-locking.

Mounting Instructions for MSR Shock and Vibration Data Loggers

User Manuals and Product Guides

Mounting Instructions for MSR Shock and Vibration Data Loggers

(Size: 1.42 MB)

Orientation

Align the Axes of the data Loggers with the main direction of movement. The data loggers can be mounted in any position. Make a note of the position and direction of the axes for later evaluation.

FAQs

Customer Questions

Is the software compatible with Windows 10?

Yes, it will work with Windows10

Can one of the analog inputs be used as a trigger to capture acceleration events? For example, record 5 seconds before the trigger (falling and/or rising voltage) to 5 seconds after the trigger event?

Yes, this meets the requirements of the VFC. All of our vaccine monitoring loggers meet their requirements. This particular logger has audible alarm.

Please, mind that only logged in users can submit questions

Your question:

I agree to the Privacy Policy

Your name:

get notification on email when the answer is ready

Your e-mail: