InTemp Dry Ice Multi-Use Data Logger

SKU
CX603
In Stock
$160.00
  • External Sensor for Recording Temperature Measurements in the Range of -95C to 50C
  • Wireless Transmission of Recorded Readings to iOS and Android Devices Using Bluetooth Smart LE Communications
  • Powered by a Non-Replaceable CR2450 Lithium Battery with 1 Year Typical Life (1 Minute Sampling Rate)
  • Stores up to 16,000 Measured Readings with Date/Time Stamp if Bluetooth Communications Not Available
  • Includes 3-Point NIST Certificate of Calibration (Valid for up to 1 Year from Date of Purchase*)

Includes External Sensor, Calibration Certificate and InTemp and InTempConnect Apps Available on the Apple and Android Stores

*The included Factory Calibration Certificate may be up to a few months old at time of purchase. 

Overview of the InTemp CX603 Ultra-Low Temperature Data Logger

The InTemp CX603 is a wireless temperature logger designed for dry ice applications. The logger transmits data to mobile devices via a Bluetooth Low Energy (BLE) connection. The CX603 is a multiple use data logger that can record data for up to 365 days and record temperatures as low as -95°C (-139°F), using the integrated 1.5-meter probe. Logger configuration and data download is done through the free InTemp app which offers multiple preset configurations, as well as the ability to create custom configurations. The logger has a built-in alert to notify you if a temperature excursion occurs. Once downloaded the data can easily and quickly be analyzed from within the InTemp app as well as exported as needed.

When used with the optional CX Gateway (sold separately) you can receive real-time notifications of temperature excursions we well as automatic downloads of data from loggers within the range of the device.

User Manuals and Product Guides

Onset InTemp® CX603 Dry Ice Multi-Use Data Logger Specifications

Channels 1 (External)
Temperature Measurement Range: -95°C to 50°C (-139°F to 122°F)
Accuracy (-95°C to -40°C): ±1.5°C (±2.7°F)
Accuracy (-40°C to -10°C): ±1.0°C (±1.8°F)
Accuracy (-10°C to 50°C): ±0.5°C (±0.9°F)
Response Time: 1 Minute 30 Seconds typical to 90% in open air Moving 1 m/s (2.2 mph), Unmounted
Resolution: 0.013°C (0.023°F) @ 25°C
Drift: <0.1°C (0.018°F)
Cable Length: 1.5 Meters (4.92 ft)
Probe Type: Food-Grade Stainless Steel with Blunt Tip
Probe Dimensions: 31.75mm (1.25") x 4.75mm (0.188")
Calibration 3-Point NIST Calibration, Probe Only, Valid for up to 1 Year from Time of Purchase
Data Storage Capacity 16,000 Temperature Readings (When Bluetooth Communications Not Available)
Alarms Visual LED and Audible
Logger Use Multi Use with 90 Day Life
LED Indicators Battery Status, Alarm Status, Logging Status and Bluetooth Status
Sampling Rate 1 Second to 18 Hours (User-Specified)
Power Source CR2450 3.0 Volt Lithium Battery (Non-Replaceable)
Battery Life 1 Years typical @ 1 Minute Sampling Rate
Note: Dependant Upon Environment, Operating Range, Logging Interval, Remaining Connected with the InTemp App, Excessive Report Generation, Numerous Audible Alarms and Paging
Battery Shelf Life 1 Year
Time Accuracy ±1 Minute per Month @ 25°C
Communications Type: Bluetooth Wireless
Wireless Data Standard: Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)
Transmission Range: Up to 30.5 Meters (100 ft) Line of Sight
Radio Power: 1 mW (0 dBm)
Software InTemp App and InTempConnect
Note: Bluetooth 4.0 is Required on your Mobile Device (Phone or Tablet)
OS Compatibility Android: 4.4, 5.0, 5.1 and 6.1
iOS: 8.3, 8.4 and 9.0
Bluetooth: 4.0
Operating Range Temperature: -30°C to 50°C (-22°F to 122°F)
Humidity: 0 to 95% RH (non-condensing)
Standards Compliance CE, IP65, 21CFR Part 11
Weight 25.5 grams (0.90 oz.)
Dimensions 6.9 cm x 4.5 cm x 1.1 cm (2.71" x 1.76" x 0.42")
Customer Questions
The specifications list the battery as non-replaceable - does this mean that the logger needs to be recharged periodically, or that when the battery is exhausted the entire unit must be replaced?
In the case of LogTag Recorders "non-replaceable" means that when the battery dies the logger must be replaced.  There is no way to recharge or replace the battery. 
The description for the software states that it is compatible with Android and iOS, but doesn't mention windows. Is there a Windows 10 application that can be used to read the logger?
In order to connect directly with the logger for configuration and data viewing/download is to use either the Android or iOS mobile application. Once you save the data to your mobile device you can easily transfer the data file by email to any desktop...
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.