AC Current

• Measurement Range of 100mA to 2000Aac
• Transformation, Low Phase Shift and Broad Frequency Response
• High Quality Magnetic Cores and Uniform Windings Provide Sensitivity for Low and 1200Aac Measurements
• Accurate Voltage Output of 1 mV/A to 100 mV

Compatible with the L101 Simple Logger, L102 Simple Logger and L562 Simple Logger

• Tape-Wound Cores Improve High and Low End Performance
• 100mVac/Aac - 10 mVac/Aac Output Signals
• 0.78" Jaw with Hooked Design Facilitates Clamping and Hooking onto Conductors
• 40Hz to 10kHz Response
• Designed to EN 61010, 600 Volt Cat III Safety Standards

Compatible with AEMC L101 Simple Logger II, L102 Simple Logger II and L562 Simple Logger II

• Analyze, Measure and Accurately Display Distorted Current Waveforms and Harmonics
• Large Jaw Window for Use on Cables and Bus Bars
• Encompasses a Special Circuit and 3 Ranges to Maximize Frequency Response Performance
• High Quality Magnetic Core and Uniform Windings Provide for Accurate Measurements up to 3000 Amps AC
• Transformation and Low Phase Shift with Broad Frequency Response

Compatible with AEMC Simple Logger IIs, Oscilloscopes, Waveform Displaying Instruments Able to Benefit from its Frequency Response Performance

• Current Range: 10 to 1000Amps AC; 10 to 1300Amps AC
• Accuracy: ±2.5%
• Conductor Size: 41mm (1.6")
• Cable Length: 3 Meters (10 ft)
• Dimensions: 22.4cm x 9.7cm x 4.4cm (8.8" x 3.82" x 1.73")
• Weight: 540 grams (19 oz)

• Current Range: 50mA to 6500 Amps AC
• Accuracy: ±1.0%
• Clamping Diameter: 7.64" (190mm)
• Conductor Size: 20mm (0.8")
• Cable Length: 3 Meters (10 ft)
• Dimensions: 17.0cm x 15.8cm x 2.5cm (6.6" x 6.2" x 0.98")
• Weight: 270 grams (7.7 oz)

• Current Range: 100mA to 12,000Amps AC
• Accuracy: ±1.0%
• Conductor Size: 20mm (0.8")
• Cable Length: 3 Meters (10 ft)
• Dimensions: 28.0cm x 26.5cm x 2.5cm (11.0" x 10.4" x 0.98")
• Weight: 220 grams (9.5 oz)

• Current Range: 200mA to 120Amps AC (100A); 5mA to 6Amps AC (5A)
• Accuracy: ±1.0%
• Conductor Size: 20mm (0.78")
• Cable Length: 3 Meters (10 ft)
• Dimensions: 13.5cm x 5.1cm x 3.0cm (5.47" x 2.00" x 1.18")
• Weight: 540 grams (19 oz)

• Current Range: 2 to 240 Amps AC
• Accuracy: ±1.0%
• Conductor Size: 20mm (0.8")
• Cable Length: 3 Meters (10 ft)
• Dimensions: 13.5cm x 5.1cm x 3.0cm (5.47" x 2.00" x 1.18")
• Weight: 690 grams (24 oz)