Concrete
Single or multi-channel thermocouple data loggers can be used to monitor the temperature of concrete during the curing or hardening process. Thermocouple sensors embedded inside the concrete can tell you the core temperature throughout the curing process. This will let you know if you need to heat or cool the concrete to ensure maximum strength and prevent cracking during maturity of the concrete.
-
WEBDAQ-316
- Stand-Alone Temperature Data Logger with Remote Monitoring and Control
- Built-in Web Interface for Configuring Applications, Logging Data, Update Digital Outputs, Send Alarm Email/SMS Notifications and View Real-Time Data
- (16) Thermocouple Inputs Isolated to 250 Volts and (4) Digital IOs for Triggers and Alarms
- Cold Junction Compensation (CJC) Enabled for All Channels and Auto Zero Support on a Single Channel to compensate for Offset Errors
- Ability to Export Recorded Data to csv format for Excel® and MATLAB®
Includes Ethernet Cable, Calibration Certificate, Quick Start Guide, AC Power Adapter with USA, UK and Europe Plugs
-
WEBDAQ-504
- Stand-Alone Vibration and Acoustic Data Logger with Remote Monitoring and Control
- (4) Simultaneous Analog Inputs Isolated to 250 Volts and (4) Digital IOs for Triggers and Alarms
- Built-in Web Interface for Configuring Applications, Logging Data, Update Digital Outputs, Send Alarm Email/SMS Notifications and View Real-Time Data
- Real-Time FFTs for Continuous Monitoring and AnalysisTriggers and FFT Display
- Ability to Export Recorded Data to csv format for Excel® and MATLAB®
Includes Ethernet Cable, Quick Start Guide, AC Power Adapter with USA, UK and Europe Plugs
-
01-0012
- (2) External Thermocouple Inputs with Additional Internal Temp Sensor for CJC
- Accepts Type J, K, S, T or E Thermocouple Sensor Probes
- 25/second to 8 Hour User-Selectable Sampling Rate
- Powered-By a Factory Replaceable 10-Year 3.6 Volt Lithium Battery
- Continuous (FIFO) or Stop When Full Sampling Methods
-
01-0013
- (7) External Thermocouple Inputs and (1) Internal Temperature Sensor
- Accepts Type J, K, S, T or E Thermocouple Sensor Probes
- Internal Temperature Sensor Features A Measurement Range of -40°C to 70°C (-40°F to 158°F) and ±0.2°C Accuracy
- Powered-By a Factory Replaceable 10-Year 3.6 Volt Lithium Battery
- 25/Second to 8 Hour User-Selectable Sampling Rate
- Continuous (FIFO) or Stop When Full Sampling Methods
-
176-T3
- 4 External Thermocouple Probes Measure Remote Temperature Conditions (Sold Separately)
- Accepts Type J (-100°C to 750°C), K (-195°C to 1000°C) and T (-200°C to 400°C) TC Probes
- Stores up to 2 Million Measured Readings in Non-Volatile Memory or onto Removable SD Card
- Rated IP54 with Dust and Splashed Water Protection
- Operates on (1) Lithium User-Replaceable Battery with 8 Year Battery Life
Includes Wall Bracket, Batteries and Certificate of Conformance. Software is Available as a Download.