LogTag CP100 Calibratable Smart Probe w/ 3.0 Meter Cable Length
SKU
CP100K-30
In Stock
$74.50
- -40°C to 90°C Measurement Range with 0.8°C Accuracy
- 3.0 Meter Sensor Probe Can Be Swapped Out and Calibrated Separately
- Gold-Plated MCX Connector for Secure Connection
- Compatible with the LogTag TRED30-16U, and Dual Channel UTRED30-16 and UTRED30-WIFI Data Loggers
NOTE: To use Smart Probes, you must select them in the "Additional Settings" tab within LogTag Analyzer Software.
LogTag CP100K-30 Calibratable Smart Sensor Probe Specifications
| Temperature | Measurement Range: -40°C to 90°C (-40°F to 210°F) Accuracy (-40°C to -20°C): ±0.5°C (±0.9°F) Accuracy (-20°C to 40°C): ±0.8°C (±1.4°F) Accuracy (40°C to 70°C): ±0.8°C (±1.4°F) Accuracy (70°C to 99°C): ±1.2°C (±2.2°F) Resolution (-40°C to 50°C): 0.1°C (0.2°F) Resolution (50°C to 70°C): 0.2°C (0.4°F) Resolution (70°C to 80°C): 0.3°C (0.5°F) Resolution (80°C to 99°C): 0.4°C to 0.6C (0.7°F to 1.0°F) |
| Acquisition Interval | Determined by Logger, Shortest Acquistion Interval 30 Seconds |
| Sensor Reaction Time | Based on Tip, Same as for Current Probes |
| Operating Environment | Temperature (Probe End): -40°C to 99°C (-40°F to 210°F) Temperature (Signal Conditioning End): -20°C to 70°C (-4°F to 158°F) Humidity: 0 to 100% RH (Non-Condensing) |
| Storage Environment | Temperature: -40°C to 99°C (-40°F to 210°F) Humidity: 0 to 100% RH (Non-Condensing) |
| Connection Interface | 1-Wire Digital Interface to Compatible Data Loggers |
| Construction | Signal Conditioning Case Material: Polycarbonate Tip Material: Stainless Steel 316 Cable Material: PTFE |
| Environmental | Probe Tip: IP68 Probe Tip/Cable Junction: IP64 Signal Conditioning: IP44 |
| Compatibility | UTRED30-16U UTRED30-WIFI Dual-Channel UTRED30-16 Dual-Channel UTRED30-16 Single-Channel |
Customer Questions
Related Products
