LogTag UTRED30-WIFI Wireless Vaccine Monitoring Kit w/ Dual Sensors
- Monitors Vaccine Temperature in Fridges and/or Freezers from -40C to 99C Using External Sensor
- AC Powered with AAA Alkaline and Coin Cell Battery as Backup
- Recorded Readings Automatically Upload to LogTag Online for Viewing Data on Any Browser/Device
- Stores Up To 32,000 Samples/Readings if LogTag Online Cloud is Not Available
- Audible Alarm with Red LED Signals for Temperature Excursions
- Download Data to LogTag Analyzer or PDF Document for Backup if Cloud is Unavailable
- New! LogTag Online Subscription Plans: Free (Sign up Directly at LogTag Online, No Activation Code Required), 1-Year and 2-Year Subscriptions. All Cloud Subscriptions are Subject to a 15% Restocking Fee if Returned.
Includes UTRED30-WIFI Dual Data Logger, (2) ST100K-15 External Sensor Probe with Glycol Vial, Base for Glycol Bottle (LTI-BASE), Wall Mount (WMB-02), AC Adapter, Calibration Certificate, and (2) AAA Alkaline Batteries.
Overview of the LogTag VAC-UTRED30-WIFI-KIT-2 Vaccine Monitoring Kit
Our LogTag VAC-UTRED30-WIFI-KIT-2 is a wireless solution for monitoring vaccines stored in refrigerators and freezers. This unique logger includes two external probes allowing you to monitor both a fridge and freezer at the same time with a single logger. The heart of the kit is the LogTag UTRED30-WFI which has WIFI connectivity to transmit your data wirelessly to the LogTag Online cloud-based service (paid service). When used with LogTag Online, the logger can transmit alarm notifications in the event of a temperature excursion or power failure. LogTag Online is a powerful platform allowing you to access your data from anywhere you have an internet connection.
The large easy to read display is designed to show ‘at a glance’ if temperature excursions have occurred during the current day and up to the previous 29 days. Alarms are customizable during configuration, which is handled by the powerful, easy to use, free LogTag Analyzer software. The logger is primarily AC powered, using the included AC adaptor and USB cable, and features backup power by 2 AAA batteries and coin cell battery.
The kit includes everything you need to meet requirements by state health departments and the CDC for safe vaccine monitoring and storage. It includes the logger, two probes with glycol buffer bottles, calibration certificate, and mounting accessories.
Also available with the LogTag CP100 Smart Probes which allow you to swap out pre-calibrated probes without having to send the logger back to be re-calibrated. Information can be found here – VAC-UTRED30-WIFI-CP100-KIT-2
LogTag VAC-UTRED30-WIFI-KIT-2 Vaccine Wireless Monitoring Kit Specifications
| Temperature | Sensor Type: (2) Precision Thermistor Sensor Compatibility: Compatibility with all LogTag ST100 Sensors Measurement Range: -40°C to 99°C (-40°F to 210°F) Accuracy (-20°C to 40°C): ±0.3°C (Typically) Accuracy (-40°C to -20°C): ±0.5°C (Typically) Accuracy (40°C to 70°C): ±0.7°C (Typically) Accuracy (70°C to 99°C): ±1.0°C (Typically) Resolution: 0.1°C or 0.1°F Reaction Time: Typically less than 2 Minutes (T90) in Moving Air (1 m/s) |
| Data Storage Capacity | 32,000 Readings/Samples |
| Sampling Frequency | 30 Seconds to 18 Hours |
| Operating Mode | Push Button Start Specific Date & Time Optional Start Delay up to 72 Hours |
| Recording Indicators | Flashing "OK" Indicator Flashing "Alert" Indicator |
| Download Time | Typically with full memory (16,129 readings) in less than 10 secs depending on computer or readout device used |
| Standards Compliance | IP51, CFR21 Part 11, RoHS |
| Real Time Clock | Rated Accuracy: ±25ppm @ 25°C (Equivalent to 2.5 seconds/day) Rated Temperature Coefficient: -0.034 ±0.006ppm/°C (Typically ±0.00294 Seconds/Day/°C) |
| Power Source | External Power: Standard AC Power Adapter or USB Cable Internal Power (Backup): (2) AAA Alkaline Batteries and CR2032 Lithium (LiMg) Coin Cell Battery, User Replaceable |
| Communications Interface | Wireless: IEE 802.11 b/g/n/ac (2.4) WPA/WPA2 Security USB: 2.0, Micro USB Plug |
| Operating Range | Temperature: -30°C to 60°C (-22°F to 140°F) |
| Software Compatibility | Windows 11, 10 and 7 (64-Bit and 32-Bit) |
| Case Material | Polycarbonate |
| EMC Compliance | Tested and complies with EC EMC directives (EN 50081-1:1992 & EN 61000-6-1:2001) Tested and complies FCC Part 15 Subparts A and B. |
| Weight | 80g (without External Probe) |
| Dimensions | 123mm x 63mm x 12.5mm |
