Measurement Computing Corp

• Detachable Screw Terminals for (8) Single-Ended Analog Inputs or (4) Differential Analog Inputs
• Aggregate Sampling Rate up to 50 kS/s (1 Channel = 50 kS/s; 2 Channels = 25 kS/s Each)
• -10V to 10V Input Voltage Range with 1 MΩ Input Impedance
• (1) External Digital Trigger with Software-Selectable Rising and Fallling Edge
• Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• High Speed USB Device with (8) Analog Inputs, (2) Analog Outputs, (16) Digital I/Os and (1) External Event Counter
• Analog Inputs are Software Configurable for (8) Single-Ended or (4) Differential Inputs
• Independent Digital Port Configuration for Input or Output
• 32-bit Counter Can Count TTL Pulses
• Powered by +5 Volt USB Power Supply (Self Powered)

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• (8) Analog Inputs, (2) Analog Outputs, (8) Digital Inputs/Outputs and (1) Event Counter
• Bluetooth (Paired with Host Device) and USB Operation Modes for Transmission of Data
• Aggregated Sampling Rate up to 1 kS/s (Bluetooth - Continuous Scan) or 50 kS/s (USB or Bluetooth - Burst Mode) across all channels
• Software Selectable Analog Input Ranges of ±10 Volts (Single-Ended) or up to ±20 Volts (Differential)
• USB and Battery Powering Options with Battery Recharging Capability

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• 32-bit event counter
• USB 1.1 and 2.0 compatible device
• 24 digital I/O
• High current output (15 mA source, 64 mA sink)
• 37-pin connector

• Screw Terminal for (8) SE Analog Inputs, (8) Digital I/Os, (2) Analog Outputs and (1) 32-Bit Counter Input
• Aggregate Sampling Rate up to 500 kS/s (1 Channel = 500 kS/s; 2 Channels = 250 kS/s Each)
• -10V to 10V Input Voltage Range with 1 MΩ Input Impedance
• LED Indicator for Status (On or Off) and Activity (Blinking)
• Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download