Data Acquisition Modules

• (16) Analog Inputs, (8) Independent Digital I/Os and (1) Counter Input
• Up to 200 kS/s Sampling Rate Aggregated Over Entire Module, Software Programmable
• Single and Differential Analog Inputs w/ (7) Software-Selectable Measurement Ranges up to ±10 Volts
• Synchronous I/O Among Analog Input, Digital I/O and Counter Channel Types
• Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• (8) 24-Bit Analog Inputs for J, K, R, S, T, N, E, and B Type Bare Wire Thermocouple Sensor Probes
• (2) Integrated Cold Junction Compensation (CJC) Sensors
• An Independent Alarm for Each Input
• (8) User-Configurable Digital I/Os Configured for Input or Output

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• (8) Analog Inputs, (2) Analog Outputs, (8) Digital Inputs/Outputs and (1) Event Counter
• Bluetooth (Paired with Host Device) and USB Operation Modes for Transmission of Data
• Aggregated Sampling Rate up to 1 kS/s (Bluetooth - Continuous Scan) or 50 kS/s (USB or Bluetooth - Burst Mode) across all channels
• Software Selectable Analog Input Ranges of ±10 Volts (Single-Ended) or up to ±20 Volts (Differential)
• USB and Battery Powering Options with Battery Recharging Capability

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• High Speed USB Device with (8) 12-Bit Analog Inputs, (2) Analog Outputs, (16) Digital I/Os and (1) External Event Counter
• Analog Inputs are Software Configurable for (8) Single-Ended or (4) Differential Inputs
• Independent Digital Port Configuration for Input or Output
• 1.2 KS/s Aggregated Sampling Rate Over All Channels
• Powered by +5 Volt USB Power Supply (Self Powered)

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• DAQ Module with 1 Input Accepting Thermocouple Types J, K, T, R, S, N, E and B
• Software Compatible with Linux, Mac and Windows Operating Systems with Open Source Software Framework
• Integrated Cold Junction Compensation (CJC), 20-Bit Resolution and 250 ms Conversion Time
• LED Indicators Display Connection and Power Status
• Self-Powered via USB port. No External Power Needed

Includes Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• (4) 2-Position Detachable Screw Terminals with (4) Isolated Analog Inputs
• Simultaneous Sampling Rate up to 50 kS/s on Each Input Channel
• -10V to 10V Input Voltage Range with 1 MΩ Input Impedance
• 250Vrms Channel-to-Channel and Channel-to-Ground Isolation
• Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• Screw Terminal for (8) Single-Ended Analog Inputs, (8) Digital I/Os and (1) 32-Bit Counter Input
• Aggregate Sampling Rate up to 100 kS/s (1 Channel = 100 kS/s; 2 Channels = 50 kS/s Each)
• -10V to 10V Input Voltage Range with 1 MΩ Input Impedance
• Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required
• LED Indicator for Status (On or Off) and Activity (Blinking)

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

• Designed for Monitoring and Controlling the State of Switches, Fans and Valves
• 24 Logic-Level Digital Input/Outputs with High Current Output (15 mA Source, 64 mA Sink)
• Independent Digital Port Configuration for Input or Output
• Based on Industry Standard 82C55 Programmable Peripheral Interface Chip
• Powered by +5 Volt USB Power Supply (Self Powered)

Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download