The store will not work correctly when cookies are disabled.
-
Home
-
1000 Amp True AMS AC/DC Clamp Meter, Non Contact Voltage Detector w/ NIST Calibration Certificate
1000 Amp True AMS AC/DC Clamp Meter, Non Contact Voltage Detector w/ NIST Calibration Certificate
Special Order
- Measures AC/DC Current and Voltage, Resistance, Frequency, Capacitance, Duty Cycle and Temperature
- 50,000 Count Backlit LCD Display with a 61-Segment Analog Bargraph
- Built-in Non-Contact Voltage (NCV) Detector
- Constructed of Durable Double Molded Plastic Housing with CAT III 600 Volt Safety Rating
Includes Test Leads, Thermocouple Wire Probe, Thermocouple Adapter, (1) 9 Volt Battery, Soft Carrying Case and NIST Calibration Certificate
Special order - please allow 10-15 business days for this item to ship.
User Manuals and Product Guides
Reed Instruments R5040-NIST 1000A True RMS AC/DC Clamp Meter with NCV Detector Specifications
| AC/DC Current |
Measurement Range: 500 Amps, 1000 Amps
Accuracy (AC): ±(2.8% of Reading + 30 Digit
Accuracy (DC): ±(2.5% of Reading + 30 Digit
Resolution: 0.01, 0.1, 1 Amp |
| AC/DC Voltage |
Measurement Range (AC): 500mV, 5 Volts, 50 Volts, 500 Volts 750 Volts
Measurement Range (DC): 500mV, 5 Volts, 50 Volts, 500 Volts 1000 Volts
Accuracy (AC): ±(1.0% of Reading + 30 Digit)
Accuracy (DC): ±(0.1% of Reading + 4 Digit)
Resolution: 0.1mV, 0.001 Volts, 0.01 Volts, 0.1 Volts, 1 Volts |
| Resistance |
Measurement Range (AC): 500Ω, 5kΩ, 50kΩ, 500kΩ, 5MΩ, 50MΩ
Accuracy (AC): ±(1.0% of Reading + 4 Digit)
Resolution: 0.1Ω, 0.001kΩ, 0.01kΩ, 0.1kΩ, 0.001MΩ, 0.01MΩ |
| Capacitance |
Measurement Range (AC): 500nF, 5000nF, 50µF, 500µF, 5mF
Accuracy (AC): ±(3.5% of Reading + 10 Digit)
Resolution: 0.01nF, 0.nF, 0.01µF, 0.1µF, 0.1mF |
| Frequency |
Measurement Range: 10kHz
Accuracy: ±(0.3% Reading + 2 Digits)
Resolution: 0.001Hz |
| Temperature |
Measurement Range: -100°C to 1000°C (-148°F to 1832°F)
Accuracy: ±(1.0% Reading + 2.5°C (4.5°F))
Resolution: 1.0°C (1.0°F) |
| Display |
50,000 Count Backlit LCD
Features:Min, Max, Relative Mode, Diode Test, Auto Shut Off (After 15 Minutes), Range Selection (Autoranging/Manual), Display Hold |
| Features |
Duty Cycle, Non-Contact Voltage Detector, Low Battery Indicator |
| Jaw Opening |
40 mm (1.5") up to 500 MCM |
| Analog Bargraph |
Yes (61-Segment) |
| Continuity Check |
Audible Signal if Resistance <35Ω |
| Power Supply |
(1) 9 Volt Battery |
| Operating Environment |
Temperature: 0°C to 50°C (32°F to 122°F)
Humidity: 10% to 80% RH |
| Storage Environment |
Temperature: -20°C to 60°C (-4°F to 140°F)
Humidity: 10% to 80% RH |
| Overvoltage Category |
CAT III 600 Volts |
| Standards Compliance |
CE |
| Weight |
271 grams (9.6 oz.) |
| Dimensions |
23.2cm x 7.7cm x 3.9cm (9.1 3.0" x 1.9") |
-
R1000 Safety Test Lead Set
R1000
Special Order
$18.00
- Compatible with any Instruments Accepting 4 mm (0.16") Diameter Shrouded Banana Connectors
- Stainless Steel Tips
- Lead Length: 1.2 Meters (48")
- Probe Tip Length: 5 mm (0.2")
- Probe Tip Diameter: 2 mm (0.08")
- Cat II 1000 Volts, Cat III 1000 Volts and Cat IV 600 Volts Safety Ratings
-
R1020 Fused Test Lead Set
R1020
Special Order
$37.00
- A Fused Test Lead Set with 2 Fuses
- Ergonomic Comfort Grip
- 1.2 Meter Length Leads with 4 mm Tip and 137 mm Probe Length
-
Reed R2920 Type K Surface Thermocouple Sensor Probe
R2920
In Stock
$79.00
- Sensor Type: Type K
- Measurement Range: -50°C to 500°C (-58°F to 932°F)
- Designed For General Purpose Temperature Applications
- Fast Response Time
- Probe Length: 6.3" (16.0 cm)
- Probe Handle Length: 5.0" (12.7 cm)
- Wire Length: 39" (100 cm)
Compatible with Type-K Temperature Measuring Instruments
-
Reed R2930 Right Angle Type K Surface Thermocouple Sensor Probe
R2930
In Stock
$99.00
- Sensor Type: Type K
- Measurement Range: -50°C to 500°C (-58°F to 932°F)
- Designed For General Purpose Temperature Applications
- Fast Response Time
- Probe Length: 7.9" (20.0 cm)
- Probe Handle Length: 5.0" (12.7 cm)
- Wire Length: 39" (100 cm)
Compatible with Type-K Temperature Measuring Instruments
-
Reed R2940 Air and Gas Type K Thermocouple Sensor Probe
R2940
In Stock
$89.00
- Sensor Type: Type K
- Measurement Range: -50°C to 800°C (-58°F to 1652°F)
- Perforated Stainless Steel Shield Permits Fast Response and Element Protection
- Fast Response Time
- Probe Length: 6.1" (15.6 cm)
- Probe Handle Length: 5.2" (13.1 cm)
- Wire Length: 39" (100 cm)
Compatible with Type-K Temperature Measuring Instruments
-
Reed R2950 Type K Immersion Thermocouple Sensor Probe
R2950
In Stock
$79.00
- Sensor Type: Type K
- Measurement Range: -50°C to 600°C (-58°F to 1112°F)
- Specifically Designed for Immersion and General Purpose Applications
- Fast Response Time
- Probe Length: 6.1" (15.6 cm)
- Probe Handle Length: 5.0" (12.7 cm)
- Wire Length: 39" (100 cm)
Compatible with Type-K Temperature Measuring Instruments
-
Reed R2960 Type K Needle Tip Thermocouple Sensor Probe
R2960
In Stock
$79.00
- Sensor Type: Type K
- Measurement Range: -50°C to 600°C (-58°F to 1112°F)
- Specifically Designed for Food, Gel and Liquid Applications
- Fast Response Time
- Probe Length: 7.1" (18.0 cm)
- Probe Handle Length: 5.0" (12.7 cm)
- Wire Length: 39" (100 cm)
Compatible with Type-K Temperature Measuring Instruments
-
Reed R2980 Type K Air Oven/Freezer Thermocouple Sensor Probe
R2980
In Stock
$47.00
- Sensor Type: Type K
- Measurement Range: -80°C to 200°C (-112°F to 392°F)
- Stainless Steel Shield Protects Sensor
- Metal Mounting Clip Holds Probe in Place
- Flexible Stainless Steel Braided Wire
- Probe Length: 2.36" (6.0 cm)
- Wire Length: 39" (100 cm)
- Spring Loaded Jaw for Secure Grip on Pipe
-
Reed R2970 Type K Pipe Clamp Thermocouple Sensor Probe
R2970
In Stock
$47.00
- Sensor Type: Type K
- Measurement Range: -40°C to 200°C (-40°F to 392°F)
- Accuracy: 1.8°C (-40°F to 392°F)
- Fast Response Time of < 2 Seconds
- Jaw Opening: 1.4" (3.5 cm)
- Wire Length: 39" (100 cm)
- Spring Loaded Jaw for Secure Grip on Pipe
Copyright © 2026 MicroDAQ, LLC. All Rights Reserved.
