(4) External Sensor Ports for Analog Measurements (1-4 Sensors Required and sold separately)
(2) User-Replaceable AAA Alkaline Batteries with 1 Year Life (1 Minute Sampling Rate)
Stores up to 1.9 Million Measured Readings with Date/Time Stamp if Bluetooth Communications Not Available
Wireless Transmission of Recorded Readings to Phone or Tablet Using Bluetooth or Li-Cor Cloud with MX Data Plan (Sold Separately)
Includes Command Strip, Double-Sided Tape, Hook & Loop Strap and (2) AAA Alkaline Batteries. HOBOconnect App Available on the Apple Store and the Google Play Store
Overview of the HOBO™ MX1105 Bluetooth 4-Channel Analog Data Logger
The HOBO™ MX1105 is a Bluetooth, multi-channel data logger with four-channel inputs that measures and transmits data wirelessly from a variety of sensors (sold separately). Recorded data is transmitted wirelessly to either a mobile device or Windows computer using Onset’s free HOBOconnect app. The four analog inputs allow you to measure a multitude of parameters using HOBO’s self-identifying sensors (sold separately). The MX1105 gives you a very versatile self-contained tool giving you the flexibility to quickly monitor virtually any parameter you need. Available sensors include 4-20mA inputs, AC Current, AC Voltage, Air Velocity, Compressed Air Flow, DC Current, DC Voltage, Differential Pressure, Gauge Pressure, and multiple temperature sensor options.
The MX1105 is a self-contained wireless data logger that lets you use either your mobile device or Windows computer and Li-Cor’s free HOBOconnect app. HOBOconnect allows you to access data, at any time, at distances up to 100 feet using Bluetooth technology. The easy-to-use application allows you to configure the logger, read data, view data in graphs, check the operational status, configure alarm notifications, and share data files. This can all be done without any dedicated equipment beyond a mobile device or laptop. If used with an MX Data Plan (sold separately), you can set up remote alarm notifications and remotely access your data in Li-Cor's Cloud Platform.
HOBO™ MX1105 Bluetooth 4-Channel Analog Data Logger Specifications
Logger with SD-MA-420 or CABLE-4-20mA
Measurement Range: 0 to 20.1 mA Accuracy: ±0.001 mA ±0.2% of Reading Resolution: 0.3 µA
Logger with SD-VOLT-2.5 or CABLE-2.5-STEREO
Measurement Range: 0 to 2.5 Volts Accuracy: ±0.1mV ±0.1% of Reading Resolution: 40 µV
Logger with SD-VOLT-05 or CABLE-ADAP5
Measurement Range: 0 to 5.0 Volts Accuracy: ±0.2mV ±0.3% of Reading Resolution: 80 µV
Logger with SD-VOLT-10 or CABLE-ADAP10
Measurement Range: 0 to 10 Volts Accuracy: ±0.4mV ±0.3% of Reading Resolution: 160 µV
Logger with SD-VOLT-24 or CABLE-ADAP24
Measurement Range: 0 to 24 Volts Accuracy: ±1.0mV ±0.3% of Reading Resolution: 384 µV
Data Storage Capacity
1.9 Million Recorded Readings
Sampling Rate
1 Second to 18 Hours (User-Specified)
Display
Type: LCD Note: Display is Visible from 0°C to 50°C (32°F to 158°F) Display May React Slowly or Go Blank in Temperatures Outside this Range.
Power Source
(2) AAA 1.5 Volt Alkaline Batteries (User-Replaceable)
Battery Life
Bluetooth Always On: 1 Year typical @ 1 Minute Sampling Rate Bluetooth Always Off: 2 Years typical @ 1 Minute Sampling Rate Note: Dependant Upon Environment, Operating Range, Logging Interval, Remaining Connected with the App, Excessive Downloads and Paging May Impact Battery Life
Time Accuracy
±1 Minute per Month @ 25°C
Communications
Type: Bluetooth Wireless Wireless Data Standard: Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0) Transmission Range: Up to 30.5 Meters (100 ft) Line of Sight Radio Power: 1 mW (0 dBm)
Logging Modes
Fixed Interval (Normal, Statistics) or Burst
Data Storage Modes
Stop When Full or Wrap/Overwrite When Full (FIFO)
Start Modes
Immediately, Push Button, Date & Time or Next Interval
Restart Mode
Push Button
Stop Modes
When Data Storage Full, Push Button, Date & Time or After Set Interval
Software
HOBOconnect App for iOS or Android Li-COR Cloud Software Platform with Purchase of MX Data Plan NOTE: Bluetooth 4.0 is Required on your Mobile Device (Phone or Tablet)
Operating Range
Temperature: -20°C to 70°C (-4°F to 158°F) Humidity: 0 to 95% RH (non-condensing)
Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
Accuracy: ±1% to 1.5% FS
Connection: 1/4" NPT 305 Stainless Steel
Output Signal: 0 to Volts DC, 3 Wire
Available in 100 PSIG, 200 PSIG and 500 PSIG Pressure Ranges
Requires Analog Port Selection During U30 or RX3000 Series System Configuration and Use of a S-FS-CVIA when using the H22-001 Data Logger. When using a U12 or UX120 Series Data Loggers, this Sensor Requires a 0-5 VDC Analog Input Cable (CABLE-ADAP5) and External Power Provided by an AC Adapter (AC-SENS-1).
