HOBO™ U30 System Remote Monitoring System w/ USB Communications
HOBO™ U30 System Remote Monitoring System w/ USB Communications
SKU
U30-NRC-000-10-S100-000
Special Order
$715.00
Remote Data Logging and Monitoring Device with USB Communications
Data Uploaded and Viewed in your Internet Browser at HOBOLink.com
Electronics Housed Within a Rugged Double-Weatherproof, Tamper Proof Enclosure
Attach up to 15 Plug-and-Play Smart Sensors with Easy Set-up and Instructions
3 to 5 Year Life with User-Replaceable Rechargeable Battery
Includes Alarm Output Relay (Activated, Deactived or Pulsed) On User-Defined Sensor Alarms
Requires U30 Base Unit, Power Adapter or Solar Panels, Minimum of 1 Compatible Smart Sensor, Data Plan for Uploading Readings to Server, and Type A to Mini B USB Cable (#CABLE-USBMB-HS). HOBOware PRO (Paid Download Version) Software.
Special order - please note lead times for some items can take up to 8 weeks
HOBO™ U30 USB Remote Monitoring System Specifications
Data Channels
Max. 15 Channels (Some Smart Sensors use more than 1 Channel)
Data Storage Capacity
512K Maximum Storage (Number of Samples Dependant on External Sensors)
Sampling Rate
1 Second to 18 Hours
Smart Sensor Compatiblility
Compatible with Onset Smart Sensors, Except S-BPA, S-TMA and S-THA
Logging Modes
Immediate, Timed Delay, or Push-Button Start Options
Memory Modes
Stop When Full; Wrap When Full
Sensor Inputs
5 Standard - Option to Expand to 10
Alarm Output Relay
Activated, Deactivated or Pulsed on User-Defined Sensor Alarms (Relay Configured as Normally Open or Normally Closed - Rated for 30 Volts and 1 Amp Max.)
Time Accuracy
0 to 2 Seconds for first data point and ±5 Seconds per Week at 25°C (77°F)
Communications
Full Speed USB via USB mini-B Connector
Expansion Slot
One Expansion Slot (Factory-Installed)
Enclosure / Materials
Outer Enclosure: ABS Blend with SS Hinge Pins, Bronze Inserts Inner Enclosure: Polycarbonate with Bronze Inserts U-Bolts: Steel with Zinc Dichtomate Finish Gaskets: Silicone Rubber Cable Entry Channel: EPDM Rubber Cable Entry Bars: Alum. w/ ABS Plastic Thumb Screws
Enclosure Access
Hinged Door Secured by 2 Latches witEyelets for Securing with User-Supplied Padlocks
Mounting
3.8 cm (1.5") Mast or Wall Mount
Sensor Network Cable Length
100 Meters (328 ft) Maximum
Operating Range
Temperature: -20°C to 40°C (-4°F to 104°F)
Battery Life
Rechargeable Service Life: 3 - 5 Years Typical Use (Dependant Upon Environment and Operating Range)
Battery
4 Volt, 4.5AHr or 10AHr, Rechargeable Sealed Lead-Acid
External Power
Required with 4 Options to Choose from: AC-U30 Power Adapter Solar-5W Solar-15W
Software Compatibility
HOBOware PRO Version 3.5+
OS Compatibility
Windows: Windows 11, 10 and 7 (32 and 64-Bit) Mac: OS X 10.9.x, 10.10.x and 10.11.x
Standards Compliance
Weatherproof Enclosure. Tested to NEMA 6
Weight
2 kg (4 lbs 10 oz)
Dimensions
17.8cm x 11.7cm x 19.3cm (7.0" x 4.6" x 7.60")
Optional Analog Sensor Port Specifications
Input Channels
(2) Single-Ended
Field Wiring
2- or 3-wire via Screw Terminals on Detachable Connector
Input Range
User-Configurable: 0 to 20 mA DC, 0 to 20 VDC (Suitable for 2.5, 5, and 10 V Sensors)
Input Voltage
0 to 24 VDC
Input Current
0 to 24 mA DC
Current Source Impedance
Minimum: > 20 KΩ
Accuracy
±0.25% of FSR from 50mV to FSV
Excitation Power
Switched 12 VDC, up to 50 mA; User-Selectable Warm-up from 5 msec to 2 Minutes
Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
Accuracy: ±1% to 1.5% FS
Connection: 1/4" NPT 305 Stainless Steel
Output Signal: 0 to Volts DC, 3 Wire
Available in 100 PSIG, 200 PSIG and 500 PSIG Pressure Ranges
Requires Analog Port Selection During U30 or RX3000 Series System Configuration and Use of a S-FS-CVIA when using the H22-001 Data Logger. When using a U12 or UX120 Series Data Loggers, this Sensor Requires a 0-5 VDC Analog Input Cable (CABLE-ADAP5) and External Power Provided by an AC Adapter (AC-SENS-1).
