Measurement Computing Corp
-
USB-SSR24
- Exclusive USB Expansion Port for Daisy Chaining Multiple Units
- Solid-State 24 I/O Module Interface
- Control and Monitor up to 24 SSRs
- Supported by MATLAB Data Acquisition Toolbox
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
-
USB-TEMP
- (8) 24-Bit Analog Inputs for Thermocouple, RTD, Thermistor and Semiconductor Sensor Probes
- (2) Integrated Cold Junction Compensation (CJC) Sensors
- An Independent Alarm for Each Input
- (8) User-Configurable Digital I/Os Configured for Input or Output
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
-
USB-TEMP-AI
- (8) 24-Bit Analog Inputs for Voltage, Thermocouple, RTD, Thermistor and Semiconductor Sensor Probes
- (8) User-Configurable Digital I/Os Configured for Input or Output
- +/-10 Volt Measurement Range Input
- 2 Samples/second per Input Sampling Rate
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
-
USB-CTR04
- High Speed Pulse Counter for General Counting Applications
- 4 Channel Inputs with 8 MB/s Aggregate Scan Rate
- Supports Multiple Input Modes: Totalize, Period, Pulse Width and Timing Measurements
- 8 Digital Configurable I/O Channels
- Powered by +5 Volt USB Power Supply (Self Powered)
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
-
USB-CTR08
- High Speed Pulse Counter for General Counting Applications
- 8 Channel Inputs with 8 MB/s Aggregate Scan Rate
- Supports Multiple Input Modes: Totalize, Period, Pulse Width and Timing Measurements
- 8 Digital Configurable I/O Channels
- Powered by +5 Volt USB Power Supply (Self Powered)
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
-
USB-based 16 Channel 16-Bit DAQ Device$1,119.00USB-1616FS
- (16) Analog Inputs, (8) Independent Digital I/Os and (1) Counter Input
- Up to 200 kS/s Sampling Rate Aggregated Over Entire Module, Software Programmable
- Single and Differential Analog Inputs w/ (7) Software-Selectable Measurement Ranges up to ±10 Volts
- Synchronous I/O Among Analog Input, Digital I/O and Counter Channel Types
- Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
-
USB-2404-10
- (4) 2-Position Detachable Screw Terminals with (4) Isolated Analog Inputs
- Simultaneous Sampling Rate up to 50 kS/s on Each Input Channel
- -10V to 10V Input Voltage Range with 1 MΩ Input Impedance
- 250Vrms Channel-to-Channel and Channel-to-Ground Isolation
- Powered by 5 Volt USB Supply from Your PC Computer, No External AC Power Required
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download